Difference between revisions of "Receivers:Xtrend Securityboard"
Rick Hunter (talk | contribs) |
|||
| (2 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
Xtrend Reparatur mit SecureCRT | Xtrend Reparatur mit SecureCRT | ||
---- | ---- | ||
| − | Source: http://www.xtrend-home.de/forum/board13-et9x00/board50-hardware/6338-security-board/#post59144 | + | Source: http://www.xtrend-home.de/forum/board13-et9x00/board50-hardware/6338-security-board/#post59144<br /> |
| − | + | '''NOTICE: The OpenPLi team can not confirm if the procedure is correct and will work.'''<br /> | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | With a terminal program like Secure CRT you can fix some errors yourself. | |
| + | |||
| + | If e.g. the mainboard is defective, you can install a different mainboard (e.g. the secboard is defective). all you have to do is give the new mainboard the mac address of the defective, and the secboard will run with the new mainboard. | ||
| + | |||
| + | An error when flashing the boot loader can also be remedied in this way. | ||
| + | |||
| + | Here are the commands: | ||
| − | |||
# Bootloader flash: | # Bootloader flash: | ||
Latest revision as of 10:02, 16 July 2020
Xtrend Reparatur mit SecureCRT
Source: http://www.xtrend-home.de/forum/board13-et9x00/board50-hardware/6338-security-board/#post59144
NOTICE: The OpenPLi team can not confirm if the procedure is correct and will work.
With a terminal program like Secure CRT you can fix some errors yourself.
If e.g. the mainboard is defective, you can install a different mainboard (e.g. the secboard is defective). all you have to do is give the new mainboard the mac address of the defective, and the secboard will run with the new mainboard.
An error when flashing the boot loader can also be remedied in this way.
Here are the commands:
- Bootloader flash:
The image files must be placed on the root of USB stick. After inserting the USB stick to your Xtrend and turning it on, click CTRL + C numerous times on Secure CRT, then enter these commands:
flash –noheader usbdisk0:cfe.bin flash0.cfe flash –noheader usbdisk0:splash.bin flash0.splash reboot
- Image flash:
flash –forceerase –noheader usbdisk0:kernel.bin nandflash0.kernel flash –forceerase –noheader usbdisk0:rootfs.bin nandflash0.rootfs reboot
CFE>unsetenv STARTUP
If it don’t have mac address label, you have to read that in the CFE> mode. than you save that to the different location
CFE> ^C // click “ Ctrl+C “ as soon as it turn on STB CFE> ^C CFE> printenv // Display the environment variables
Variable Name Value
BOOT_CONSOLE uart0 LINUX_FFS_STARTAD 0 LINUX_FFS_SIZE 0 SPLASH_PART_STARTAD 80000 SPLASH_PART_SIZE 200000 STARTUPVERSION 1 ETH0_HWADDR XX:XX:XX:XX:XX:XX // you can see the MAC Address here LINUX_PART_STARTAD 0 LINUX_PART_SIZE 600000 DRAM0_SIZE 512 DRAM1_SIZE 0 FLASH_TYPE NOR FLASH_SIZE 4 CFE_VERSION 2.12.26 CFE_BOARDNAME BCM97405B1 CFE_MEMORYSIZE 128 *** command status = 0 CFE>
- replace IC (nor , nand flash )
Turn off STB and than replace IC (nor , nand flash ) on the STB pcb. Take notice you don’t miss each nor flash (3 type:ET5X00,ET6X00,ET9X00)
- Writing MAC Address
Write MAC Address in the nor flash after you go to CFE> mode.
CFE> help macprog2 // you can see function, use form of the macprog2 command
SUMMARY
Program a specific MAC address.
USAGE
macprog2 <macaddress>
This command programs board specific MAC addresses to the
flash. (ex. macprog2 00-01-FE-40-09-F2) // use form *** command status = 0 CFE> CFE> macprog2 00-01-FE-40-09-F2 // write MAC Address in the STB Programming flash...done *** command status = 0
Angaben ohne Gewähr, bitte nur bei bereits defekten Geräten ausprobieren!!!
==
Procedure provenant de http://www.digital-eliteboard.com/350284…tml#post2463444
Vorgehensweise : Wenn man das Secboard tauschen möchte weil es defekt ist oder, oder
Vorbereitung
- Laptop oder Rechner ( incl. Win7 )
- Serielles Kabel evtl. mit Serial USB Adapter
- Software Putty
- USB Stick mit einem IMAGE
LOS GEHT´S
Serial Kabel anschließen von Box zum Rechner( wichtig in Windows Einstellungen "Bit per second 115200" - Putty öffnen - Serial auswählen und Speed auf 115200 einstellen - Putty starten - USB-Stick mit IMAGE in den Vorderen USB Anschluss der Xtrend Box Stecken - Box einschalten und gleich im Putty Fenster die Tasten Strg + C drücken einige male hintereinander - das Image flashen also an der Box ok drücken - warten ..... - wenn das IMAGE geflasht ist sieht man im Putty Fenster " CFE> "
SOWEIT SO GUT
- jetzt lesen wir uns die MACADRESSE aus mit " printenv " ( nur zur Sicherheit ) - CFE> printenv es steht dann soetwas da:
CFE> CFE> printenv Variable Name Value
BOOT_CONSOLE uart0 LINUX_FFS_STARTAD 0 LINUX_FFS_SIZE 0 SPLASH_PART_STARTAD 80000 SPLASH_PART_SIZE 200000 STARTUPVERSION 1 ETH0_HWADDR 00:00:00:00:00:00 LINUX_PART_STARTAD 0 LINUX_PART_SIZE 600000 DRAM0_SIZE 512 DRAM1_SIZE 0 FLASH_TYPE NOR FLASH_SIZE 4 CFE_VERSION 2.12.26 CFE_BOARDNAME BCM97405B1 CFE_MEMORYSIZE 128 *** command status = 0
- nun schreiben wir die neue MACADRESSE in das MAINBOARD der Xtrend Box rein - mit dem Befehl : " macprog2 " - macprog2 00-00-00-00-00-00 ( bitte darauf achten das die MACADRESSE mit Bindestriche sind )
macprog2 00-00-00-00-00-00 Programming flash...done *** command status = 0
So nun nur noch neu starten mit Netzschalter aus und wieder ein .
Jetzt freuen das unsere Box wieder startet.
