Difference between revisions of "Zgemma"
From OpenPLi Wiki
(→How to flash Zgemma H9 Combo/Twin SE) |
(→How to flash Zgemma H9 S/2S/2H SE) |
||
| Line 83: | Line 83: | ||
Download an image from: https://openpli.org/download/zgemma/H9.2H+SE | Download an image from: https://openpli.org/download/zgemma/H9.2H+SE | ||
| − | # | + | # Download both the recovery_emmc and emmc zip file from the OpenPli website |
| − | # | + | # Do NOT unpack these files but copy these zip files to your USB stick. |
| − | # | + | # Place USB in the box while power off. |
| − | # | + | # Turn on the device at the back en PRESS AND HOLD the POWER BUTTON on THE REMOTE until the recovery menu appears |
| − | + | # Now flash the recovery_emmc zip first | |
| − | # | + | # Repeat procedure and flash the emmc image file to 'linux slot 1' |
| − | # | + | # After flashing, the box will restart in the recovery menu |
| − | # Remove USB stick | + | # Remove the USB stick |
| + | # Select 'linux slot 1' to start the flashed image | ||
Revision as of 09:15, 3 June 2021
Contents
How to flash Zgemma H1/2S/H2/S
Download a image from: https://openpli.org
- Format your USB stick with a FAT32 file system
- Unpack the ZIP file and place the content on a USB disk.
- Plug the USB stick to the back panel USB port.
- Power on,
- Press the Power Key on the front panel after you see “USB”on the display. Then the display shows “Flash”
- When done the box will boot up on its own.
- Remove usb stick once boot has completed.
How to flash a Zgemma I55 IPTV device.
Download a image from: https://openpli.org/download/zgemma/I55/
- Format your USB stick with a FAT32 file system
- Unpack the ZIP file and place the content on a USB disk.
- Change the name of the file 'Noforce' to 'force' and disconnect the stick.
- Plug the USB stick to the USB port at the right side of the I55.
- Power on the box,
- The Red led on the front lights once. After about 2 min it light again.
- When done the box will boot up on its own.
- Remove usb stick once boot has completed.
- After you have configured the basic things like Language, video and lan you choose to download plugins.
- Basically the only plugin you need is RemoteStreamConvert to let the I55 do his job.
How to flash Zgemma H7S/C/AC
Download an image from: https://openpli.org/download/zgemma/H7.S
- Use a USB stick with FAT32 format.
- Unpack the ZIP file to the USB stick.
- You should see a "zgemma" folder in the root of the USB stick.
- Power off your receiver.
- Plug the USB stick to one of the back panel USB ports. Recommended to remove all other USB connected devices.
- Power on
- Immediately after power on PRESS AND HOLD the front power button behind front flap.
- The display will show boot, USB, FLSH. Once FLSH is displayed you can release (stop pressing) the button.
- Wait, when "boot" is displayed you can remove the USB stick
How to flash Zgemma H9.2H/S /H9S/T
Download an image from: https://openpli.org/download/zgemma/H9.2H
- Use a USB stick with FAT32 format.
- Unpack the ZIP file to the USB stick.
- You should see a "zgemma" folder in the root of the USB stick.
- Power off the receiver
- Plug the USB stick to one of the back panel USB ports. Recommended to remove all other USB connected devices.
- Power the receiver on whilst holding down the REAR RESET BUTTON
- Once the front Air Digital display logo start to flash White/Red, release the rear reset button and wait, your receiver is now being flashed.
- If successful the receiver will reboot it self after the flashing process has completed.
- Remove USB stick
How to flash Zgemma H9 Combo/Twin
Download an image from: https://openpli.org/download/zgemma/H9+Combo
- Download both the recovery_emmc and emmc zip file from the OpenPli website
- Do NOT unpack these files but copy these zip files to your USB stick.
- Place USB in the box while power off.
- Turn on the device at the back en PRESS AND HOLD the POWER BUTTON on THE REMOTE until the recovery menu appears
- Now flash the recovery_emmc zip first
- Repeat procedure and flash the emmc image file to 'linux slot 1'
- After flashing, the box will restart in the recovery menu
- Remove the USB stick
- Select 'linux slot 1' to start the flashed image
How to flash Zgemma H9 Combo/Twin SE
Download an image from: https://openpli.org/download/zgemma/H9+Combo+SE
- Download both the recovery_emmc and emmc zip file from the OpenPli website
- Do NOT unpack these files but copy these zip files to your USB stick.
- Place USB in the box while power off.
- Turn on the device at the back en PRESS AND HOLD the POWER BUTTON on THE REMOTE until the recovery menu appears
- Now flash the recovery_emmc zip first
- Repeat procedure and flash the emmc image file to 'linux slot 1'
- After flashing, the box will restart in the recovery menu
- Remove the USB stick
- Select 'linux slot 1' to start the flashed image
How to flash Zgemma H9 S/2S/2H SE
Download an image from: https://openpli.org/download/zgemma/H9.2H+SE
- Download both the recovery_emmc and emmc zip file from the OpenPli website
- Do NOT unpack these files but copy these zip files to your USB stick.
- Place USB in the box while power off.
- Turn on the device at the back en PRESS AND HOLD the POWER BUTTON on THE REMOTE until the recovery menu appears
- Now flash the recovery_emmc zip first
- Repeat procedure and flash the emmc image file to 'linux slot 1'
- After flashing, the box will restart in the recovery menu
- Remove the USB stick
- Select 'linux slot 1' to start the flashed image
