Difference between revisions of "Uclan"

From OpenPLi Wiki
Jump to: navigation, search
(Created page with "frameless|right '''How to flash the receiver...'''<br /> Download a image from: https://openpli.org Unpack the ZIP file and place the conte...")
 
m (USB stick needs to have an MBR partition table, most boxes don't support GPT)
 
(34 intermediate revisions by one other user not shown)
Line 1: Line 1:
−
[[File:RECEIVERS-Edision-001.jpg|frameless|right]]
+
[[File:RECEIVERS-Uclan-001.jpg|right|250px]]
 
'''How to flash the receiver...'''<br />
 
'''How to flash the receiver...'''<br />
  
−
Download a image from: https://openpli.org
+
Format your USB stick with an MBR partition table and a FAT32 file system.<br />
−
Unpack the ZIP file and place the content on a USB disk.
+
Download a image from: https://openpli.org/download/uclan.<br />
 +
Unpack the ZIP file and place the content on the USB stick.<br />
  
 
FLASHING THE RECEIVER. <br />
 
FLASHING THE RECEIVER. <br />
−
# Power off the receiver <br />
+
# Download latest Enigma2 Image of your choice.
−
# Ensure no other USB devices are plugged into the receiver <br />
+
# USB 2.0 or 3.0 minimum 2 GB USB stick formatted with FAT32.
−
# Insert the USB stick containing the image into the rear port. <br />
+
# Unpack the image to the root of the USB stick, so in \
−
# Power the receiver on. <br />
+
# Turn off the box.
−
# You will be prompted on your TV screen to press and hold down ‘OK’ button on your REMOTE to commence the flashing process. The flashing process will then commence and progress show on TV screen. <br />
+
# Plug the USB stick into the USB 3.0 port on the right side.
−
# If successful the receiver will reboot itself after the flashing process has completed. <br />
+
# Press and hold the standby button and power on the box until "UPdt" is displayed.
−
# Remove USB stick that contains the image files.<br />
+
# Select "Flash Recovery Image" from TV screen menu. [[File:RECEIVERS-Uclan-002.jpg|frameless|centre|750px]]<br />
−
 
+
# Box restarts when update is completed.
−
<u>Note:</u> In order to load the image automagically, rename the file called "noforce" to "force"
+
#If you wnt to flash from the internet, connect the receiver to your LAN

Latest revision as of 14:25, 26 October 2023

RECEIVERS-Uclan-001.jpg

How to flash the receiver...

Format your USB stick with an MBR partition table and a FAT32 file system.
Download a image from: https://openpli.org/download/uclan.
Unpack the ZIP file and place the content on the USB stick.

FLASHING THE RECEIVER.

  1. Download latest Enigma2 Image of your choice.
  2. USB 2.0 or 3.0 minimum 2 GB USB stick formatted with FAT32.
  3. Unpack the image to the root of the USB stick, so in \
  4. Turn off the box.
  5. Plug the USB stick into the USB 3.0 port on the right side.
  6. Press and hold the standby button and power on the box until "UPdt" is displayed.
  7. Select "Flash Recovery Image" from TV screen menu.
    RECEIVERS-Uclan-002.jpg

  8. Box restarts when update is completed.
  9. If you wnt to flash from the internet, connect the receiver to your LAN
Retrieved from "https://wiki.openpli.org/index.php?title=Uclan&oldid=23994"