Difference between revisions of "Releasenotes-9.0"

From OpenPLi Wiki
Jump to: navigation, search
(→‎Known issue's:)
 
(3 intermediate revisions by the same user not shown)
Line 139: Line 139:
 
*Fixed DNS IP and restore of an autobackup
 
*Fixed DNS IP and restore of an autobackup
 
**If you have flashed 9.0-release and restored a backup from a previous release, and you had configured a fixed DNS IP address, you will need to enter this again, as it can't be restored due to the aforementioned changes to the DNS code. If you have configured a fixed IP for the box as well, an autoinstall after the flash will fail as the download servers can't be reached without DNS.
 
**If you have flashed 9.0-release and restored a backup from a previous release, and you had configured a fixed DNS IP address, you will need to enter this again, as it can't be restored due to the aforementioned changes to the DNS code. If you have configured a fixed IP for the box as well, an autoinstall after the flash will fail as the download servers can't be reached without DNS.
−
**To work around this, go to Auto Backup in the menu after you have entered the DNS IP again, press the menu button, and run autoinstall from there.
+
**If you are going to flash and making the backup that will be restored after the flash, you must either convert your DNS to DHCP before the flash , or manually set your DNS again after the flash and the restore, and then manually run the autoinstall again via autobackup.

Latest revision as of 17:02, 5 January 2024

New features or improved features:

  • This image is using the OE 'Hardknott branch' (Yocto project)
  • Standby add delay 1.5 sec deep standby and CEC
  • Add flash online support for sfx6008
  • FlashImage add sanity check if plugin Autobackup is running
  • PowerOffTimer add check mediafilesInUse before power off
  • Added Opticum Unicable II LNB
  • [rc_models] Add sfx6008 remote
  • Restore network config before attempting an autoinstall
  • Added skin extension to support connected widgets
  • Added octagon3 remote controller for Octagon SX888
  • Fixed sort for image list in Multiboot list
  • [Network] completely rewrite the DNS name server code
  • Remove NameserverSetup screen
  • Multiboot - order by slots or by mode under blue button
  • Allows to delete nameservers in AdapterSetup
  • Multiboot - text for blue for order by slots or modes
  • Multiboot - allow OpenPli images to participate in a Vu+ Multiboot
  • Improve messages Media Scanner/ Hotplug
  • Fixed timesync
  • Introduce extended info also for iptv in ServiceInfo
  • Uclan ustym 4k s2 ott x - initial addition
  • Updated support FBC virtual tuners when using a motor
  • Gtwebengine: fix hbbtv patch
  • Ffmpeg update Version (Cosmetic) 4.4.1 -> 4.4.3
  • Gstreamer update -> Version 1.20.5
  • Add openresolv to the image to manage resolv.conf
  • Umount nfs v4 mounts on shutdown
  • Ffmpeg
    • Add eac3 (muxer, demuxer, parser)
    • Remove not usable h265
    • Convert new style
  • Openresolv update to version 3.13.1
  • Auto install before Auto restore. This solves several issues:
    • Packages with conf files will create -opkg files if they already exist when installed
    • Packages with runtime dependencies will fail due to missing config
    • Packages with enigma config dependencies will fail due to missin config
    • Packages without proper conf files no longer have their restored files overwritten
  • Added octagon3 remote controller for Octagon SX888
  • Network update DNS setup and save
    • Remove openresolv removing and code to work without it.Therefore don't write anything in the file /etc/resolv.conf. Use this file only to get DHCP nameservs.
  • Multiboot - allow OpenPli images to participate in a Vu+ Multiboot
  • Updated support FBC virtual tuners when using a motor. Tuner setting modes "Second cable of motorized LNB", "Additional cable of motorized LNB"
  • Some improvements in SoftwareUpdate UpdatePlugin
    • Improve imports.
    • Move embedded skin to skin_default skin.xml.
    • Slider shows the actual progress of the installed packages.
    • Uses property for title, text and value.
    • Remove instance variables sliderPackages and oktext.
    • Print errors in log on exceptions.
  • FlashImage: Add option to only download an image and not flash
  • Update dB/snr value tuner M1502
  • Vu 4K Multiboot: Multiboot can be enabled for Vu 4K devices.

New hardware support:

  • Octagon SFX6008 WL
  • Rtl8818fu driver (sfx6008wl)
  • Uclan ustym 4k s2 ott x
  • Add another Inverto LNB IDLU-32L412-UNBRR-OPN, Unicable II Programmable 32UB dCSS LNB

New or improved Plugins and Settings:

  • FileCommander back to e2openplugins repo
  • Update enigma2-plugin-extensions-epgimport-rytec.bb.
    • Added azman sources
    • Replaced Spanish EPG with Koala EPG
  • Update ZeroTier to v1.10.2
  • Openwebif add sfx60x8
  • Added Octagon SFX6018 to OpenWebif
  • Add enigmalight recipe
  • Add Gerbera to Feed
  • Update Xstreamity
  • Gerbera update 1.11
  • Zerotier fix fetch failure
  • Sabnzbd: Update to version 3.7.1
  • Kodi update 19.5
  • Openwebif added Octagon SX888 4K UHD
  • Openwebif added uClan ustym4ktwin
  • OpenVpn Update to version 2.6.2
  • Kodi update 20
  • Sabnzbd: Update to version 3.7.2
  • Add serienrecorder
  • Add the mtr diagnostic tool to the feed

Look and feel changes:

  • Add an option to only restore network config
  • TimerList add tuner number before tuner type name
  • New radio background image

Driver updates:

  • Octagon
    • Fix screenshot issue for Fhd skin
    • Update drivers, fix recovery and multiboot files
  • Vuplus Fixed Python3 issue in RemoteControlCode when pressing Green
  • qviart fix cp preserve permission error
  • octagon Change PAGE+/- to CH+/1 for rcu
  • octagon fixed satip channel play issue
  • vuplus [BluetoothSetup] updated for 4k models
  • Zgemma h8: fix online update for bootmenu
  • Octagon fix streaming issues
  • Abcom make usb serial driver pl2303 a module
  • Gfutures make usb serial driver pl2303 a module
  • Maxytec make usb serial driver pl2303 a module
  • Gfutures hisilicon: update recovery fastboot and bootargs to the last version
  • Maxytec
    • Add to nim info "Supports_Blind_Scan"**
    • Add display for multiboxpro
    • Update to latest fastboot and bootmenu
  • Octagon [sfx6008wl] add the rtl8188fu driver to the image, used by the WL model
  • Xtrend remove dependency from the old repo for binaries
  • Uclan
    • Add ustym4ks2ottx box model
    • Add demod avl62x1 support
  • Fix build with gcc 10+ host compiler (many bsp's)
  • Vuplus
    • Multiboot - init
    • vuduo4k,duo4kse: reintroduce load of wifi driver in init script-needed while booting image from VU+ kexec MB. The script checks if the driver is already loaded and skip loading it, if necessary
  • Gigablue Update gb-v3ddriver-gb7252.bb
  • Uclan
    • Replaced slash screen with the original uClan screen
    • Remove the splash logo, we don't overwrite them
  • Vuplus
    • vuduo4k - vuplus-kexec - update timeout for searching STARTUP_RECOVERY to 4secs
    • Vusolo4k: backport mmc patch from 3.14.28-1.10
  • Gigablue Remove plugin bluetoothsetup-gb7252 from gb7252 image In the plugin is used the closed-source c library _gbbt, which is not compatible with python3, so the plugin does not work because it calls GSOD
  • Gfutures added FTDI_SIO to the HD66SE defconfig
  • Qviart
    • dual update driver and libraries
    • fixed AC3 downmix/passthrough issue : it didn't sound when user AC3 passthrough by HDMI
    • added hot key function for new RCU
    • fixed 1080p skin issue : it didn't show channel name properly when you move fast
    • fixed TXT button issue : box halted when you press TXT button

Other improvements:

  • Fix build with Ubuntu 23.04

Known issue's:

  • Fixed DNS IP and restore of an autobackup
    • If you have flashed 9.0-release and restored a backup from a previous release, and you had configured a fixed DNS IP address, you will need to enter this again, as it can't be restored due to the aforementioned changes to the DNS code. If you have configured a fixed IP for the box as well, an autoinstall after the flash will fail as the download servers can't be reached without DNS.
    • If you are going to flash and making the backup that will be restored after the flash, you must either convert your DNS to DHCP before the flash , or manually set your DNS again after the flash and the restore, and then manually run the autoinstall again via autobackup.
Retrieved from "https://wiki.openpli.org/index.php?title=Releasenotes-9.0&oldid=24284"