Difference between revisions of "Dvb-fe-tool"
From OpenPLi Wiki
Rick Hunter (talk | contribs) |
|||
| Line 2: | Line 2: | ||
When you want to look for the signal strength via the commandline use the tool: dvb-fe-tool. This tool is included with the v4l-util toolpack that isn't standard included within the image. | When you want to look for the signal strength via the commandline use the tool: dvb-fe-tool. This tool is included with the v4l-util toolpack that isn't standard included within the image. | ||
| − | + | First: '''v4l-utils''' needs to be installed on the receiver. Use the command:'''opkg install v4l-utils'''<br /> | |
| − | Then | + | Then use the command '''dvb-fe-tool'''. <br /> |
The parameters that must be added:<br /> | The parameters that must be added:<br /> | ||
-m: Monitoring<br /> | -m: Monitoring<br /> | ||
Latest revision as of 12:37, 24 September 2018
When you want to look for the signal strength via the commandline use the tool: dvb-fe-tool. This tool is included with the v4l-util toolpack that isn't standard included within the image.
First: v4l-utils needs to be installed on the receiver. Use the command:opkg install v4l-utils
Then use the command dvb-fe-tool.
The parameters that must be added:
-m: Monitoring
-f: Get the Front-end parameters
value: 0 = tuner A, 1 = tuner B, 2 = tuner C, 3 = tuner D
Then I made a scan for tuner C (value in this case is then 2)
dvb-fe-tool -m -f 2
With gave the results:
root@hd2400:/# dvb-fe-tool -m -f 2
Lock (0x1f) Signal= 0.39% C/N= 54.00%
Lock (0x1f) Signal= 0.39% C/N= 54.00%
To stop the monitoring Press CTRL-C
In this case the signal strength is 54% with is good for a cable channel.
A good satellite signal gives the following result:
Lock (0x1f) Signal= 18.93% C/N= 13.97dB
Layer A: C/N= 71.00%
