Difference between revisions of "Vimastec"
From OpenPLi Wiki
Rick Hunter (talk | contribs) |
Rick Hunter (talk | contribs) |
||
| Line 1: | Line 1: | ||
| + | [[File:RECEIVERS-Vimastec.png|frameless|right]] | ||
'''Supported receivers'''<br /> | '''Supported receivers'''<br /> | ||
| − | |||
VS 1000<br /> | VS 1000<br /> | ||
Revision as of 22:59, 14 May 2017
Supported receivers
VS 1000
VS 1500
How to flash the VS 1000 receiver...
There are two ways to flash the VS 1000
Solution 1:
- Fat32 formated usb with directory /vs1000 <- put there unpacked image ( 2 files: imageversion, disk.img)
- plug usb flash into receiver
- unplug power
- press and hold front button on box and plug-in power and wait "flashing" on display, then release button on box
- The receiver will now be flashed. After completion the receiver will restart
thats all ... flash starting
Solution 2:
- Fat32 formated usb with directory /vs1000 <- put there unpacked image ( 2 files: imageversion, disk.img)
- plug usb flash into receiver
- Press and hold front button and wait "flashing" on display ... but it spend cca 40sec before "flashing"
- The receiver will now be flashed. After completion the receiver will restart
How to flash the VS 1500 receiver...
There are two ways to flash the VS 1500
Solution 1:
- Fat32 formated usb with directory /vs1500 <- put there unpacked image ( 2 files: imageversion, disk.img)
- plug usb flash into receiver
- unplug power
- press and hold front button on box and plug-in power and wait "flashing" on display, then release button on box
- The receiver will now be flashed. After completion the receiver will restart
thats all ... flash starting
Solution 2:
- Fat32 formated usb with directory /vs1500 <- put there unpacked image ( 2 files: imageversion, disk.img)
- plug usb flash into receiver
- Press and hold front button and wait "flashing" on display ... but it spend cca 40sec before "flashing"
- The receiver will now be flashed. After completion the receiver will restart
