Difference between revisions of "Tips and Tweaks"

Revision as of 10:50, 23 June 2017

Recording with a Zapper (eg. Vu Zero / Vu Solo Se)

By default some Vu⁺ boxes are a zapper, meaning you can not record with it. If you want to record with it, you can install the "pau" plugin/extension. It is located in the extensions section of the plugin browser.

Wireless Bridge

If you want to use WiFi with your box, there are many solutions, like dongles, WiFi USB adapter, powerline adapters, etc. In general we recommend (but certainly if you have problems with the stability of your WiFi connection) to make use of a wireless bridge.

USB sticks working or not

When you want to use an USB stick, lets say for flashing your box with OpenPLi. There is no way of telling your stick might work, it's trail and error! The reason that some USB sticks are working and some not, has to do with drivers. Generally speaking, old USB sticks with less than 1Gb have the chance not to work. Most of the recent USB disks shouldn't have a problem.

Adding IP Camera's to your channellist

It is possible to watch your IP Camera on TV. Here you can find the necessary information.

Mediaplayer (gstreamer) and subtitles

OpenPLi's media player gstreamer can play many external content, like MKV, MP4, etc. If you want to add a subtitle to these containers (MKV, MP4, etc) it is best to mux them. Muxing is the process of combining these video, audio and subtitle components into the container file, so that it can be read/played back. Take a look at GStreamer

Debugging Enigma

If you want to debug and want to know what is happening in Enigma, you can start your receiver in debug mode with the following command:

root@<receiver>: init 4
root@<receiver>: ENIGMA_DEDBUG_LVL=4 /usr/bin/enigma2.sh

To stop: Press CRTL-C. Enigma will halt. Then start enigma with:

root@<receiver>:init 3

Or reboot the receiver with:

root@<receiver>:Reboot

Note: For debugging gstreamer with read actions stuff use: ENIGMA_DEBUG_LVL=4 GST_DEBUG=*soup*:6,*dvb*:6 enigma2

for easier reading (Less logging) use: ENIGMA_DEBUG_LVL=4 GST_DEBUG=*soup*:4,*dvb*:4 enigma2

Accessing your receiver and editing files

You can change many settings using the Graphical User Interface (GUI), but in some cases it can be necessary to access the files manually. You can do this by downloading and using Putty. By default you can login with telnet, so if you use puttytel.exe (a Telnet-only client) and login your box. By default there is no password for the root, so login with "root" and so you should not have to enter a password.

Telnet usage

By default the enigma receiver does not have a password. To access the receiver via de command line, use a program like Putty, or use the command 'Telnet' from the commandline.

telnet <ip address receiver>

telnet 192.168.65.247
Trying 192.168.65.247...
Connected to 192.168.65.247.
Escape character is '^]'.
Username: root
Password: no password, leave blank

How to use SSH instead of Telnet

SSH runs on OpenPLI by default.... But, to use SSH you need to set a password first.

First Login with telnet. (See above)
Then change the password with the command 'passwd'.

root@et7x00:~# passwd
Changing password for root
Enter the new password (minimum of 5 characters)
Please use a combination of upper and lower case letters and numbers.
New password: 
Re-enter new password: 
passwd: password changed.

Then close the telnet session

root@et7x00:~# exit
Connection closed by foreign host.

Ok, now the box is ready to be accessed by ssh:

ssh root@192.168.65.247
Warning: Permanently added 'p247,192.168.65.247' (RSA) to the list of known hosts.
root@p247's password: 
root@et7x00:~# 

Remark: When you connect for the first time with ssh, you'll get a fingerprint notification. You can accept this by typing 'yes'

RSA key fingerprint is SHA256:x2iV/az3N6IVgWYEpAw4mDE5ahaRX2hEDb7xxEgaVO9.
Are you sure you want to continue connecting (yes/no)? yes

I forgot my password

If you forgot your password or used an extension for changing it with OpenPLi you can clear the password by editing the first line in /etc/shadow which contains the hash of your password. Just delete the second parameter.

example:

root:.3nwZcSK66fbg:15617:0:99999:7::: \\with password:

root::15617:0:99999:7::: \\without password:

How to create a log file of your Putty session

If you want to record what is happening during your Putty session here is how you can let Putty Record it.

Screenshot

If you want to take a screenshot, let's say to show a certain result to someone, you can make a screenshot of the current state of the screen on your TV using Webif. When in Webif on the left of the screen you open remote control and click on Make screenshot.

Skip time

Skip time in a recording works much faster than using the forward or rewind keys on your remote. You can customize the Skip time keys on your remote in Menu > Setup > System > Expert Settings> Record and adjust the settings for '1'/'3' - '4'/'6' -'7'/'9' buttons.

Default:

• 1 = -15 seconds back in the recording
• 3 = +15 seconds forward in the recording
• 4 = -1 minute
• 6 = +1 minute
• 7 = - 5 minutes
• 9 = + 5 minutes

ECM info

If you want to see how the current channel is encrypted, you can look this up with ECM Info. The white lines tels you what kind of encryptions are being used and the yellow line tells you with type of encryption is used to decrypt the channel.

Menu Levels

The enigma receiver has a lot of options in the menu. Some are easy to understand, and some are not so common used. So we reworked the menu's Setup\System section.
The main goal is that simple, advanced and expert settings are properly separated. At the Customise option you can enter Normal, Advanced or Expert. This will result in less or more options in the Customise option, but also on the User interface, Audio / Video and Expoert settings menu's.

Mountmanager Problems

When your box uses a kernel 3.x (Menu-Information-Receiver)and you want to mount something that's has a kernel 4.x your CIFS share might fail, even though you entered the data carefully, but there is a solution.

The solution is simple, you can try the following; If you make a mount with MountManager , change the "mount options" from "rw" to "rw, sec = ntlm".

Now exit and re-mount or Reboot your box and if this was the cause, you can now access your share