Difference between revisions of "Receivers:Mut@nt"
From OpenPLi Wiki
Rick Hunter (talk | contribs) (Created page with "'''Supported receivers'''<br /> frame|right * ET4x00<br /> '''How to flash the receiver...'''<br /> Download a image from: https://openpl...") |
Rick Hunter (talk | contribs) |
||
| Line 1: | Line 1: | ||
'''Supported receivers'''<br /> | '''Supported receivers'''<br /> | ||
| − | [[File: | + | [[File:RECEIVER-Mutant-001.jpg|frame|right]] |
| − | * | + | * HD51<br /> |
| − | + | * HD500C<br /> | |
| + | * HD1100<br /> | ||
| + | * HD1200<br /> | ||
| + | * HD1265<br /> | ||
| + | * HD1500<br /> | ||
| + | * HD2400<br /> | ||
'''How to flash the receiver...'''<br /> | '''How to flash the receiver...'''<br /> | ||
Revision as of 21:56, 6 May 2017
Supported receivers
- HD51
- HD500C
- HD1100
- HD1200
- HD1265
- HD1500
- HD2400
How to flash the receiver...
Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk.
FLASHING THE RECEIVER.
- Unzip compressed file.
- Copy the folder to a USB Pen Drive.
- Power off or reboot the receiver with the mains switch on the rear. Connect USB Pen Drive.
- Power on receiver with the mains switch on the rear.
- After rebooting or cold start the power LED will blink several times after some time. At that moment press the power button on the front panel.
- Flashing of the image will start
- Booting will start automatically once the flashing process has completed
Note: In order to load the image automagically, rename the file called "noforce" to "force"
