Difference between revisions of "Information for Developers"

Revision as of 16:05, 13 August 2024

'I'm a developer, is there any technical info available from the PLi® team?

Welcome and tell your developer friends about us

Yes and welcome aboard! If you have specific question, you can use our PLi® Third Party Development forum to ask it. You will find we are most accommodating.

This page is about software development using OpenEmbedded-core. If you're looking for the text that used to be on the this page, it's now called developer-information-old.

==

Create your own build

See also this forum post on setting up a development environment: http://openpli.org/forums/topic/18806-openpli-quick-setup-ubuntudebian/

Basically, it boils down to this:

Run Linux. Most of us use either Ubuntu 22.04 or an EL v9 distro, I suggest you do the same, if you don't know what to pick. Stay away from bleeding edge distro's like Fedora, you'll run into all sorts of misery.

Make sure the disk you use for the OE tree supports symbolic links, and you use at least git v1.8.0. And Bitbake doesn't support NFS natively, you need local block storage.

Install prerequisite packages, as described here: http://www.openembedded.org/wiki/OEandYourDistro

For Ubuntu 22.04 LTS, that's:

 sudo apt-get install sed wget cvs subversion git-core \
  coreutils unzip texi2html texinfo docbook-utils \
  gawk python3-distutils diffstat help2man make gcc build-essential g++ \
  desktop-file-utils chrpath default-jre gettext zip libssl-dev

You may need to create a symlink makeinfo->texi2any (in the bin folder) and a symlink makeinfo->/bin/texi2any in the hosttools folder.

For EL9, that's:

 sudo dnf install gawk make wget tar bzip2 gzip python unzip perl patch \
    diffutils diffstat git cpp gcc gcc-c++ glibc-devel texinfo chrpath socat \
    openssl-devel zip python3 perl-Thread-Queue libstdc++-static \
    glibc-devel.i686 libgcc.i686 libstdc++-devel.i686

Note: Ubuntu 24.04 users

A security restriction introduced in an update causes projects to not build from the Ubuntu IDE. This restriction can be disabled system-wide with the following command:

sudo sysctl -w kernel.apparmor_restrict_unprivileged_userns=0 

when booting the PC and building an image, you'll have to do this every boot.

To make the change persistent, add kernel.apparmor_restrict_unprivileged_userns = 0 to /etc/sysctl.conf.

NOTE: This is removing a security restriction which was added to Ubuntu, so do it at your own risk.

Setup the build environment:

sudo chmod ugo+rw /opt
mkdir -p /opt/openpli
cd /opt/openpli

Clone the openpli repository:

git clone https://github.com/OpenPLi/openpli-oe-core.git
or
git clone git@github.com:OpenPLi/openpli-oe-core.git

Setup the OpenPli environment

 cd openpli-oe-core
 make

Build your first image

 MACHINE=xxXXXX make image
 or
 cd build
 MACHINE=xxXXXX
 source env.source
 bitbake -k openpli-enigma2-image

To find the valid MACHINE=xxXXXX you can have a look at the .conf file in the meta-folder of the manufacturer MMMMM:

 cd meta-MMMMM/conf/machine
 ls

If the build is successfull the resulting file will be into:

 ./openpli-oe-core/build/tmp/deploy/images/xxXXXX/
 openpli-homebuild-xxXXXX_usb.zip

Updating

Before every build, update your cloned git repositories with

cd openpli-oe-core
make update

Note that by default, the develop branch of Enigma is used when you build an image, assuming that most "homebuild" users will want to build the latest development image.

If you want to build a homebuild release image, you need to specify the correct branch when building:

 cd openpli-oe-core
 git checkout release-9.0
 git submodule update --init --recursive
 ENIGMA2_BRANCH=release-9.0 MACHINE=xxXXXX make image

The resulting file will be into:

 ./openpli-oe-core/build/tmp/deploy/images/xxXXXX/
 openpli-homebuild-xxXXXX_usb.zip

EL incompatibilities

None

Ubuntu incompatibilities

When running a build on ubuntu, you can run into the issue that the build is aborted by the sanity checker, complaining that "makeinfo" does not exist. Even though the package texinfo is installed. This is caused by the fact makeinfo is now a symlink, which doesn't make it into hosttools.

To fix this, execute

 cd <your-build-dir>/build/tmp/hosttools
 ln -s /usr/bin/texi2any makeinfo

Cleaning up the sstate cache

You will notice that after each build, the storage used by the sstate-cache will increase. This is because this cache holds all data required to be able to skip building packages that haven't changed, and previous release data is not purged by bitbake.

To address this, make your git directory the current directory, and run

 ./openembedded-core/scripts/sstate-cache-management.sh --cache-dir=./build/sstate-cache --stamps-dir=./build/tmp/stamps --yes

Note that if your cache is old, this may take a long time, as on our buildserver (which does build all images!) the result after a second build run is "1385449 out of 1682374 files will be removed!"

Your own feed server

Once you've built your own image, you'd want to keep it up to date. You can just let the box update itself from your build PC using the GUI as if running a full distro. To do that, you first need to build the optional packages that go into the feed:

 cd openpli-oe-core
 MACHINE=xxXXXX make feed

Next, you need to install a webserver of some sort on the build PC, for example Apache2.

As an example, if you've installed apache on Ubuntu, it will share /var/www/html/ with the world. Create a feed subdirectory, and then add a symlink to the "ipk" folder of your build, for example:

 sudo mkdir /var/www/html/feeds
 sudo ln -s ${HOME}/work/openpli-oe-core/build/tmp/deploy/ipk/ /var/www/html/feeds/openpli-homebuild

To tell your box about this feed location, edit your local.conf or site.conf to contain the following lines:

 FEED_NAME = "openpli-homebuild"
 DISTRO_HOST = "mybuildpc.local"

After this, if you run a new image build, it will make the /etc/opkg/ files on the box point to your feed. After installing the built image on your box, you should be able to upgrade with opkg commands or the enigma2 GUI.

No real webserver handy?

If you don't have a real webserver, like Apache or Nginx, handy, there are some other options available to serve files via http.

Using PHP 5.4+:

 cd /var/www/html/feeds
 php -S 0.0.0.0:80

Using Python 2.x:

 cd /var/www/html/feeds
 python -m SimpleHTTPServer 80

Using Python 3.x:

 cd /var/www/html/feeds
 python3 -m http.server 80

Using Ruby:

 cd /var/www/html/feeds
 ruby -rwebrick -e'WEBrick::HTTPServer.new(:Port => 80, :DocumentRoot => Dir.pwd).start'

Using Ruby 1.9.2+:

 cd /var/www/html/feeds
 ruby -run -ehttpd . -p80

Using Perl:

 cpan HTTP::Server::Brick # one-time install of perl dependency
 cd /var/www/html/feeds
 perl -MHTTP::Server::Brick -e '$s=HTTP::Server::Brick->new(port=>80); $s->mount("/"=>{path=>"."}); $s->start'

Using Busybox HTTPd:

 cd /var/www/html/feeds
 busybox httpd -f -p 80

NB: For ports below 1024, like the standard HTTP port 80 in the example above, you need root or administrator privileges.

OpenPLi - Git commands

Here is the link to some basic git commands.