Difference between revisions of "Vimastec"
From OpenPLi Wiki
Rick Hunter (talk | contribs) |
Rick Hunter (talk | contribs) |
||
| Line 14: | Line 14: | ||
# unplug power | # unplug power | ||
# press and hold front button on box and plug-in power and wait "flashing" on display, then release button on box | # press and hold front button on box and plug-in power and wait "flashing" on display, then release button on box | ||
| − | # | + | # The receiver will now be flashed. After completion the receiver will restart |
thats all ... flash starting | thats all ... flash starting | ||
| Line 21: | Line 21: | ||
# Plug-in USB flash | # Plug-in USB flash | ||
# Press and hold front button and wait "flashing" on display ... but it spend cca 40sec before "flashing" | # Press and hold front button and wait "flashing" on display ... but it spend cca 40sec before "flashing" | ||
| + | # The receiver will now be flashed. After completion the receiver will restart | ||
Revision as of 22:50, 14 May 2017
Supported receivers
VS 1000
VS 1500
How to flash the VS 1500 receiver...
There are two ways to flash the VS 1500
Solution 1:
- fat32 formated usb with directory /vs1500 <- put there unpacked image ( 2 files: imageversion, disk.img)
- plug usb flash into box
- unplug power
- press and hold front button on box and plug-in power and wait "flashing" on display, then release button on box
- The receiver will now be flashed. After completion the receiver will restart
thats all ... flash starting
Solution 2:
- Plug-in USB flash
- Press and hold front button and wait "flashing" on display ... but it spend cca 40sec before "flashing"
- The receiver will now be flashed. After completion the receiver will restart
