Difference between revisions of "Vimastec"
From OpenPLi Wiki
Rick Hunter (talk | contribs) |
Rick Hunter (talk | contribs) |
||
| Line 10: | Line 10: | ||
'''Solution 1:''' | '''Solution 1:''' | ||
| − | # fat32 formated usb with directory /vs1500 <- put there unpacked image ( 2 files: imageversion, disk.img) | + | # fat32 formated usb with directory '''/vs1500''' <- put there unpacked image ( 2 files: imageversion, disk.img) |
# plug usb flash into box | # plug usb flash into box | ||
# unplug power | # unplug power | ||
Revision as of 22:51, 14 May 2017
Supported receivers
VS 1000
VS 1500
How to flash the VS 1500 receiver...
There are two ways to flash the VS 1500
Solution 1:
- fat32 formated usb with directory /vs1500 <- put there unpacked image ( 2 files: imageversion, disk.img)
- plug usb flash into box
- unplug power
- press and hold front button on box and plug-in power and wait "flashing" on display, then release button on box
- The receiver will now be flashed. After completion the receiver will restart
thats all ... flash starting
Solution 2:
- Plug-in USB flash
- Press and hold front button and wait "flashing" on display ... but it spend cca 40sec before "flashing"
- The receiver will now be flashed. After completion the receiver will restart
