Vimastec

Supported receivers

VS 1000
VS 1500

---

How to flash the VS 1000 receiver...

There are two ways to flash the VS 1000

Solution 1:

1. Download a image from: https://openpli.org
2. Fat32 formated usb with directory /vs1000 <- put there unpacked image ( 2 files: imageversion, disk.img)
3. plug usb flash into receiver
4. unplug power
5. press and hold front button on box and plug-in power and wait "flashing" on display, then release button on box
6. The receiver will now be flashed. After completion the receiver will restart

thats all ... flash starting

Solution 2:

1. Download a image from: https://openpli.org
2. Fat32 formated usb with directory /vs1000 <- put there unpacked image ( 2 files: imageversion, disk.img)
3. plug usb flash into receiver
4. Press and hold front button and wait "flashing" on display ... but it spend cca 40sec before "flashing"
5. The receiver will now be flashed. After completion the receiver will restart

How to flash the VS 1500 receiver...

There are two ways to flash the VS 1500

Solution 1:

1. Download a image from: https://openpli.org
2. Fat32 formated usb with directory /vs1500 <- put there unpacked image ( 2 files: imageversion, disk.img)
3. plug usb flash into receiver
4. unplug power
5. press and hold front button on box and plug-in power and wait "flashing" on display, then release button on box
6. The receiver will now be flashed. After completion the receiver will restart

thats all ... flash starting

Solution 2:

1. Download a image from: https://openpli.org
2. Fat32 formated usb with directory /vs1500 <- put there unpacked image ( 2 files: imageversion, disk.img)
3. plug usb flash into receiver
4. Press and hold front button and wait "flashing" on display ... but it spend cca 40sec before "flashing"
5. The receiver will now be flashed. After completion the receiver will restart