Zgemma

How to flash Zgemma H1/2S/H2/S

Download a image from: https://openpli.org

1. Format your USB stick with a FAT32 file system
2. Unpack the ZIP file and place the content on a USB disk.
3. Plug the USB stick to the back panel USB port.
4. Power on,
5. Press the Power Key on the front panel after you see “USB”on the display. Then the display shows “Flash”
6. When done the box will boot up on its own.
7. Remove usb stick once boot has completed.

How to flash a Zgemma I55 IPTV device.

Download a image from: https://openpli.org/download/zgemma/I55/

1. Format your USB stick with a FAT32 file system
2. Unpack the ZIP file and place the content on a USB disk.
3. Change the name of the file 'Noforce' to 'force' and disconnect the stick.
4. Plug the USB stick to the USB port at the right side of the I55.
5. Power on the box,
6. The Red led on the front lights once. After about 2 min it light again.
7. When done the box will boot up on its own.
8. Remove usb stick once boot has completed.
9. After you have configured the basic things like Language, video and lan you choose to download plugins.
10. Basically the only plugin you need is RemoteStreamConvert to let the I55 do his job.