Qviart

How to flash the Qviart Lunix 4K receiver...

1. Format your USB stick with a FAT32 file system
2. Download the USB image of your choice on https://openpli.org/download/qviart/
3. Extract the USB image (it is a .zip archive) on your PC using your favorite unzip tool to the root directory of your USB stick. The result is that you get a directory update and in this directory you find a directory lunix4k in which you find the necessary files.
4. Switch your Qviart receiver off (Power off, not stand-by!).
5. Insert the prepared USB stick into the USB port of your receiver
6. Switch your Qviart receiver on
7. Immediately after the box is turned on, an update message appears. Message appears only briefly!
8. Now press the red “Power” button on your remote control when message appears, update is started and you will a screen that report the process started.
9. Wait until update is loaded. The box restarts as a completely fresh box with latest software.

How to flash the Qviart Dual 4K receiver...

1. Format your USB stick with a FAT32 file system
2. Download the USB image of your choice on https://openpli.org/download/qviart/
3. Extract the USB image (it is a .zip archive) on your PC using your favorite unzip tool to the root directory of your USB stick. The result is that you get a directory Dual in which you find the necessary files.
4. Switch your Qviart receiver off (Power off, not stand-by!).
5. Insert the prepared USB stick into the USB port in the front of your receiver
6. Press power button on the front (and keep pressing it) of your receiver and switch your Qviart receiver on
7. Now you can choose by pressing the power button. between

Boot - Update (Android?) - Update Enigma

7. Choose Update Enigma to flash OpenPLi