Backup/AutoBackup
Make a Autobackup
Install the Autobackup plugin
Select a Backup location. Preferable a USB device
Daily automate backup: Enable
Select a time: e.g. 04:00
Create Autoinstall: off
EPG cache backup: off
To test, select the yellow button. If everything is ok, you see the Last Backup date with a recent timestamp.
Use a Autobackup
When you want to flash your receiver with a new software, take the following steps: remove all the USB devices Make a new USB disk with the image you want to flash your receiver During the flash procedure.. Add the removed USB disk. Do this before the flash has been completed
The receiver will start after flashing, and the installation process will find the auto backup files and will restore the receiver with the settings that are known before you flashed your receiver.
