Qviart
From OpenPLi Wiki
How to flash the Qviart Lunix 4K receiver...
- Format your USB stick with a FAT32 file system
- Download the USB image of your choice on https://openpli.org/download/qviart/
- Extract the USB image (it is a .zip archive) on your PC using your favorite unzip tool to the root directory of your USB stick. The result is that you get a directory update and in this directory you find a directory lunix4k in which you find the necessary files.
- Switch your Qviart receiver off (Power off, not stand-by!).
- Insert the prepared USB stick into the USB port of your receiver
- Switch your Qviart receiver on
- Immediately after the box is turned on, an update message appears. Message appears only briefly!
- Now press the red “Power” button on your remote control when message appears, update is started and you will a screen that report the process started.
- Wait until update is loaded. The box restarts as a completely fresh box with latest software.
How to flash the Qviart Dual 4K receiver...
- Format your USB stick with a FAT32 file system
- Download the USB image of your choice on https://openpli.org/download/qviart/
- Extract the USB image (it is a .zip archive) on your PC using your favorite unzip tool to the root directory of your USB stick. The result is that you get a directory named Dual in which you find the necessary files.
- Switch your Qviart receiver off (Power off, not stand-by!).
- Insert the prepared USB stick into the USB port in the front of your receiver
- Press power button on the front (and keep pressing it) of your receiver and switch your Qviart receiver on
- Now you can choose by pressing/pulsating the power button, between Boot - Update (Android?) - Update Enigma
- Choose Update Enigma to flash OpenPLi
