Spycat
From OpenPLi Wiki
Revision as of 19:21, 23 May 2017 by Rick Hunter (talk | contribs) (Created page with "'''Supported receivers'''<br /> How to flash the receiver... Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk. FLASHING THE...")
Supported receivers
How to flash the receiver... Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk.
FLASHING THE RECEIVER. Unzip compressed file. Copy the content to a USB Pen Drive. Power off or reboot the receiver with the mains switch on the rear. Connect USB Pen Drive. Power on receiver with the mains switch on the rear. After rebooting or cold start the power LED will blink several times after some time. At that moment press the power button on the front panel. Flashing of the image will start Booting will start automatically once the flashing process has completed
