Difference between revisions of "Axas"

From OpenPLi Wiki
Jump to: navigation, search
Line 3: Line 3:
 
#Download image (not the multiboot).
 
#Download image (not the multiboot).
 
#Unpack file, after unpacking, there is a folder "e4hd" with content, disk.img and imageversion
 
#Unpack file, after unpacking, there is a folder "e4hd" with content, disk.img and imageversion
#Copy this folder with content to a USB stick.
+
#Copy this folder with content to a USB stick, which has a LED light.
#Use a usb stick which has en led.
 
 
#Switch off the box at the power switch and insert the stick into the USB port on the side.
 
#Switch off the box at the power switch and insert the stick into the USB port on the side.
 
#Switch on the box at the mains switch and hold down the on/off button
 
#Switch on the box at the mains switch and hold down the on/off button

Revision as of 09:06, 5 October 2022

RECEIVERS-Axas-001.png
  1. Download image (not the multiboot).
  2. Unpack file, after unpacking, there is a folder "e4hd" with content, disk.img and imageversion
  3. Copy this folder with content to a USB stick, which has a LED light.
  4. Switch off the box at the power switch and insert the stick into the USB port on the side.
  5. Switch on the box at the mains switch and hold down the on/off button
  6. if there is a light on the usb stick, watch it and wait until is stops flashing, this can take a few minutes.
  7. When flashing is complete, remove the stick from the port.
  8. The box now starts and the basic settings can be made.