Axas

From OpenPLi Wiki
Revision as of 09:05, 5 October 2022 by 40H3X (talk | contribs)
Jump to: navigation, search
RECEIVERS-Axas-001.png
  1. Download image (not the multiboot).
  2. Unpack file, after unpacking, there is a folder "e4hd" with content, disk.img and imageversion
  3. Copy this folder with content to a USB stick.
  4. Use a usb stick which has en led.
  5. Switch off the box at the power switch and insert the stick into the USB port on the side.
  6. Switch on the box at the mains switch and hold down the on/off button
  7. if there is a light on the usb stick, watch it and wait until is stops flashing, this can take a few minutes.
  8. When flashing is complete, remove the stick from the port.
  9. The box now starts and the basic settings can be made.