Difference between revisions of "Cable:Ziggo"

From OpenPLi Wiki
Jump to: navigation, search
Line 5: Line 5:
 
Frequency: 164.000<br />
 
Frequency: 164.000<br />
 
Symbolrate: 6900<br />
 
Symbolrate: 6900<br />
Modulation: QAM64 or QAM256 - <span style="color:SteelBlue"> Note: This is changed since June 14th <span style="color:Black"> <br />
+
Modulation: QAM64 or QAM256 - <span style="color:SteelBlue"> Note: This is changed since June 14th. You made decide it for yourself.<span style="color:Black"> <br />
 
Network ID: 05555 for FTV and Scrambled channels<br />
 
Network ID: 05555 for FTV and Scrambled channels<br />
 
Network ID: 04444 for FTV channels<br />
 
Network ID: 04444 for FTV channels<br />

Revision as of 22:29, 8 July 2017

Former UPC also known as Ziggo-East
If your contract/customer code does not start with a 1, then the following information is valid. Enter the following settings:


Frequency: 164.000
Symbolrate: 6900
Modulation: QAM64 or QAM256 - Note: This is changed since June 14th. You made decide it for yourself.
Network ID: 05555 for FTV and Scrambled channels
Network ID: 04444 for FTV channels



Ziggo before the merger also known as Ziggo-West
If your contract/customer code start with a 1, then the following information is valid. Enter the following settings:


Frequency: 474.000
Symbolrate: 6875
Modulation: QAM64
Network ID: 05555 for FTV and Scrambled channels
Network ID: 04444 for FTV channels



At the Ziggo website: https://www.ziggo.nl/klantenservice/televisie-radio/digitale-tv/activeringscode-frequentie-netwerk-id-instellen/#netwerk-id-philips there is a notice that Philips TV sets from the year 2010 with the product type 6000 or higher, do not hold the network code 5555 for more than a few days. To workaround this problem Ziggo has kept the old network-ID's active. To continue watching channels, you must enter the following code:


Region Network-ID
Noord-Holland 43136
Flevoland 43138
Friesland 43140
Gelderland 43142
Brabant 43144
Zuid-Holland 43146
Alkmaar 43192
Alphen a/d Rijn 43185
Amersfoort 43195
Breda 43191
Capelle 43194
Den Bosch 43198
Den Haag 43186
Driebergen 43189
Emmen 43208
Gorichem 43190
Gorredijk 43209
Groningen 43206
Hengelo 43211
Hilversum 43196
Hoogeveen 43205
Mill 43197
Roermond 43202
Roosendaal 43199
Sassenheim 43184
Schoonbron 43203
Sneek 43210
Tilburg 43200
Utrecht 43187
Veenendaal 43188
Velsen 43193
Venlo 43201
Winschoten 43207
Zwolle 43204

Note: Netwerk ID by hometown: (in case your hometown isn't mentioned try a city near your hometown.)


Obviously, of course, the entire cabling must comply with the current standard set by ziggo. In other words Cable tire A + (4g shielded) plugs, cables, splitters, plugs, amplifiers etc. The AOP (Subscriber Acquisition Point) must also comply with this. If this does not comply with this standard, it's likely that, after the new channel format, low and high frequency transmitters will not appear in the scan. Among others since the last change, the movie channels have been in almost the entire ziggo region at low frequencies.

A major mistake is that the cable connects to an outdated analogue wall socket. These old wall sockets, as well as the old cabling in the walls, often no longer meet the current "Kabelkeur A+" standard and therefore blocks the high and low frequencies. The only correct way is to connect the cable that is A + certified by cable directly to the AOP. The AOP should have a modern AOP equipped with the cable mark mark. AOPs without a quality mark often no longer meet.