Cable:Ziggo

From OpenPLi Wiki
Revision as of 23:25, 2 November 2020 by Dimmie (talk | contribs)
Jump to: navigation, search

Ziggo, former UPC area (before april 2015)
If your contract/customer code does not start with a 1, then the following information is valid. Enter the following settings:


Frequency: 164.000 or 474.000
Symbolrate: 6900
Modulation: QAM64 (all area's) and in some area's QAM256 is also possible
Network ID: 05555 for FTV and Scrambled channels
Network ID: 04444 for FTV channels


When for some reason scanning with network id 05555 or 06666 does not work correctly, you can try a different network ID, which is the same as described on the Ziggo website for some Philips TV's.

At the Ziggo website: https://www.ziggo.nl/klantenservice/televisie-radio/digitale-tv/Philips there is a notice that Philips TV sets from the year 2010 with the product type 6000 or higher, do not hold the network code 5555 for more than a few days. To workaround this problem Ziggo has kept the old network-ID's active. To continue watching channels, you must enter the following code:


Region Network-ID
Noord-Holland 43136
Flevoland 43138
Friesland 43140
Gelderland 43142
Brabant 43144
Zuid-Holland 43146



Ziggo, (until april 2014 this was split into 3 different area's known as Ziggo West, Ziggo North and Ziggo South)
If your contract/customer code start with a 1, then the following information is valid. Enter the following settings:


Frequency: 474.000
Symbolrate: 6875
Modulation: QAM64
Network ID: 05555 for FTV and Scrambled channels
Network ID: 06666 for FTV and Scrambled channels
Network ID: 04444 for FTV channels


Instead of contract/customer code, you can also verify by your zipcode if you have to use these settings. All former Ziggo West/North/South customers are located in one of the following zipcode area's:

1119-1175 1181-1189 1218-1412 1426-1427 1432 1435-1873 1901-1902 1906 1911 1921-1935 1941-1949 1951 1961-1969 1971-2035 2041-2042 2051-2114 2116 2121-2158 2161-2163 2165 2171-2235 2241-2245 2251-2254 2261-2289 2311-2361 2371-2377 2381-2382 2391-2481 2491-2632 2661-2662 2711-2729 2731-2743 2751-2761 2771 2861-2872 2901-2954 3381 3411-3621 3625-3648 3701-3712 3721-3732 3734-3735 3737-3739 3741-3749 3751-3755 3761-3835 3901-3962 3971-3985 3991-4191 4201-4286 4611-4797 4811-4879 4881-4891 4901-4944 5011-5071 5074-5076 5084-5126 5131 5133-5146 5151-5154 5161-5176 5211-5349 5361-5364 5366-5375 5381-5398 5401-5469 5471-5482 5561-5583 5681-5685 5766-5815 5821-5846 5851-5944 5951-5954 5961-6039 6041-6077 6081-6099 6101-6112 6114-6471 6591-6599 7271-7439 7441-7591 7621-7635 7685 7687-7688 7691-7707 7711-7722 7731-7738 7741-7766 7771-7798 7811-7859 7861-7864 7871-7895 7901-7936 7938-7938 7941-7991 8011-8322 8325-8385 8388-8397 8401-8435 8448-9079 9241-9249 9301-9497 9501-9503 9511-9515 9521-9536 9541-9566 9571 9581-9591 9601-9628 9635-9636 9641-9648 9649-9651 9654-9659 9661-9699 9711-9893 9901-9909 9911-9924 9931-9949 9951-9999


When for some reason scanning with network id 05555 or 06666 does not work correctly, you can try a different network ID, which is the same as described on the Ziggo website for some Philips TV's.

At the Ziggo website: https://www.ziggo.nl/klantenservice/televisie-radio/digitale-tv/Philips there is a notice that Philips TV sets from the year 2010 with the product type 6000 or higher, do not hold the network code 5555 for more than a few days. To workaround this problem Ziggo has kept the old network-ID's active. To continue watching channels, you must enter the following code:


City Network-ID
Alkmaar 43192
Alphen a/d Rijn 43185
Amersfoort 43195
Breda 43191
Capelle 43194
Den Bosch 43198
Den Haag 43186
Driebergen 43189
Emmen 43208
Gorichem 43190
Gorredijk 43209
Groningen 43206
Hengelo 43211
Hilversum 43196
Hoogeveen 43205
Mill 43197
Roermond 43202
Roosendaal 43199
Sassenheim 43184
Schoonbron 43203
Sneek 43210
Tilburg 43200
Utrecht 43187
Veenendaal 43188
Velsen 43193
Venlo 43201
Winschoten 43207
Zwolle 43204

Note: Netwerk ID by city: in case your city isn't mentioned try one nearby.


Obviously, of course, the entire cabling must comply with the current standard set by Ziggo. In other words 'kabelkeur A+' certified (4g shielded) plugs, cables, splitters, plugs, amplifiers etc. The AOP (Subscriber Acquisition Point, in dutch: Abonnee Overname Punt) must also comply with this A+ standard. If this does not comply with this standard, it's likely that, after the new channel format, low and high frequency transmissions (channels) will not appear in the scan. Among others since the last change, the movie channels have been put in almost the entire ziggo region at very low frequencies.

A major mistake is that the cable has been connected to an outdated analogue wall socket. These old wall sockets, as well as the old cabling in the walls, often no longer meet the current "Kabelkeur A+" standard and therefore block the high and low frequencies. The only correct way is to connect is the usage of an 'kabelkeur A+' certified cable connected directly from the decoder to the AOP. The AOP should be a modern AOP equipped with the cable mark. AOP's without this quality mark often no longer meet (and may block low and high frequencies).


Since the merge between Ziggo and UPC on April 13th 2015, all different cards will work in in the entire new Ziggo area. So for example an irdeto card from formerly Casema (Ziggo West) can also be used in all other Ziggo Area's. Same applies to cards from former UPC, @Home and Multikabel.