From OpenPLi Wiki
Revision as of 16:23, 29 April 2017 by 40H3X (talk | contribs)
Jump to: navigation, search


After a fresh flash OpenPLi will start with the installation wizard, which will guide you through the installation. The installation wizard will guide you through the following steps:

  1. Select your language
  2. Video input selection
  3. Video Mode selection
  4. Overscan wizard
  5. Connect your receiver to the internet (when a DHCP server is present this will be easiest)
  6. Internet Connection will be checked
  7. Tuners will be setup, so you'll have to know which satellites you can connect to.

Remember there is no channel list installed, so you can do a scan or download one. Of course you can change all the above settings afterwards, if you want.