Today is: Wednesday, July 17 2019
22.214.171.124, Welcome to the OpenPLi Wiki
|Current version: 6.2|
There is a new section in the Wiki named Problems and Solutions to hopefully improve the chance you finding a solution to problems you might encounter. As a consequence some content of the Tips and Tweaks section has moved over to this new section. Also both sections have been alphabetized, we hope this helps and improves the readability of the content.
- 1 OpenPLi - Installation and configuration:
- 2 OpenPLi - Functions and default plugins
- 3 OpenPLi - Information for advanced users
- 4 OpenPLi - Information for developers
- 5 OpenPLi - Faits divers
OpenPLi - Installation and configuration:
Overview of all supported receivers and how to flash a your receiver. Also there is a comparison table were many receivers are listed and are compared right down to component level, so you can make an easier choice if you want to buy one. Also there is a special table that gives the power consumption of many receivers.
Here will be explained how to install OpenPLi on your receiver, various methods are explained and below are the various links that you might need. The link to the what, how and why to backup is recommended.
Before you update, upgrade or change anything it is good to have a backup. Here the plugins "Autobackup" (by default installed) and the "BackupSuite" (has to be installed) are explained.
Looking for network ID's, symbolrates and frequency's to scan your cable channels..? Here you can find the information of our cable provider.
Channel settings file for various satellites.
Here you will find a list of known external devices that are known to work with OpenPLi.
When you want to look at encrypted channels and not only Free to Air (FTA) you can use a softcam. In this section is explained how to install and use a few.
Many useful tips on various stuff on working with OpenPLi, Putty, SSD useful or not, debugging, how to crashlog, etc. etc.
This section deals with all kind of problems and possible solutions. If you run into a problem using OpenPLi you can take a peak here to find a solution.
OpenPLi - Functions and default plugins
Some functions are not easy to find, but can be very helpful, here there are a few.
This feature can make your devices work better together, so like using one remote to control TV and receiver. Note it is turned off by default
With this function Hotkeys can be (un)selected to make things easier.
Here the mountmanager is explained. It is used to mount (make) accessible external drives, like with a NAS or (the harddisk of) other receivers. Mounting means associating a storage device to a particular location in the directory tree.
If want to extend the functions of OpenPLi you can install plugins from the feed. Remember these plugins are not maintained by OpenPLi, so always backup before installing.
This function gives you the option to use the tuners from another OpenPLi receiver, when they are wired or wireless (WiFi) connected. This way you can watch TV when there is no access to satellite or cable or expand your
Information about the Webif (webinterface) and how to access and configure it.
OpenPLi - Information for advanced users
Many useful information on various subjects.