Offline decoding

From OpenPLi Wiki
Revision as of 15:57, 9 June 2017 by 40H3X (talk | contribs)
Jump to: navigation, search

We are looking for people owning a CI module, and people using a softcam with a local smartcard (should be everyone!) to test the offline decoding capability of all OpenPLi supported hardware.

To test, do the following:

  1. Stop the softcam, and remove all CI modules from the box
  2. Make a short test recording from an encoded channel that uses a smartcard, using a timer, with Recording type "don't descramble, record ECM"
  3. When done, do the same, but then from an encoded channel that uses the CI module
  4. In case you have a smartcard that works in both a CI and with a softcam, one recording is enough.

Now play back the recording(s), to make sure your screen stays black.

  1. Start your softcam again, make sure the smartcard is operational, and play the first recording back again.
  2. If you now have an image, your box supports offline decoding via the softcam.
  3. Stop the softcam again, insert the CI module with the smartcard, and play back the second recording.
  4. If you now have an image, your box supports offline decoding via de CI.

Source: https://forums.openpli.org/topic/51311-help-needed-offline-decoding/#entry720296

Receiver Softcam CI
vusolo4k no no
vuuno4k no no
formuler1 yes dunno
formuler3 yes dunno
formuler4 yes dunno
formuler4turbo yes dunno
hd11 yes dunno
hd51 yes no
hd1200 yes dunno
hd1265 yes dunno
hd1500 yes dunno
hd2400 yes no
hd530c yes dunno
vuduo2 no no
vuduo no no
vusolo2 no no
vusolo no no
vusolose no no
vuultimo no no
vuuno no no
vuzero no no
fusionhd yes dunno
fusionhdse yes dunno
purehd yes dunno
et10000 yes no
et5x00 yes dunno
et6x00 yes dunno
et7x00 no dunno
et8000 yes dunno
et8500 no dunno
et9x00 yes no
h3 yes dunno
h4 yes dunno
h5 yes dunno
h7 yes dunno
i55 yes dunno
xp1000 yes dunno
et4x00 yes dunno
hd500c yes dunno
hd1100 yes dunno
lc yes dunno
sh1 yes dunno
Miraclebox Premium Micro no dunno
Miraclebox Premium twin+ no no