Difference between revisions of "Qviart"

From OpenPLi Wiki
Jump to: navigation, search
Line 3: Line 3:
  
 
=='''How to flash the Qviart Lunix 4K receiver...'''<br />==
 
=='''How to flash the Qviart Lunix 4K receiver...'''<br />==
Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk.
 
 
 
# Format your USB stick with a FAT32 file system
 
# Format your USB stick with a FAT32 file system
 
# Download the USB image of your choice on https://openpli.org/download/qviart/
 
# Download the USB image of your choice on https://openpli.org/download/qviart/

Revision as of 10:16, 16 July 2020

RECEIVERS-Qviart-001.png


How to flash the Qviart Lunix 4K receiver...

  1. Format your USB stick with a FAT32 file system
  2. Download the USB image of your choice on https://openpli.org/download/qviart/
  3. Extract the USB image (it is a .zip archive) on your PC using your favorite unzip tool to the root directory of your USB stick. The result is that you get a directory update and in this directory you find a directory lunix4k in which you find the necessary files.
  4. Insert the prepared USB stick into the USB port of your receiver
  5. Switch your Qviart receiver off (Power off, not stand-by!).
  6. Switch your Qviart receiver on
  7. Immediately after the box is turned on, an update message appears. Message appears only briefly!
  8. Now press the red “Power” button on your remote control when message appears, update is started and you will a screen that report the process started.
  9. Wait until update is loaded. The box restarts as a completely fresh box with latest software.