Difference between revisions of "Receivers:Edision"

From OpenPLi Wiki
Jump to: navigation, search
m (USB stick needs to have an MBR partition table, most boxes don't support GPT)
 
(7 intermediate revisions by 2 users not shown)
Line 1: Line 1:
'''Supported receivers'''<br />
+
[[File:RECEIVERS-Edision-001.jpg|frameless|right]]
  
[[File:RECEIVERS-Edision-001.jpg|frame|right]]
+
'''How to flash an Edision receiver. The procedure is the same for all models...'''<br />
OS mini<br />
 
OS mini +<br />
 
OS mega<br />
 
  
'''How to flash the receiver...'''<br />
+
Format your USB stick with an MBR partition table and a FAT32 file system.  
 
+
Download the image for the receiver of your choice from https://openpli.org/download/edision.
Download a image from: https://openpli.org
 
 
Unpack the ZIP file and place the content on a USB disk.
 
Unpack the ZIP file and place the content on a USB disk.
  
Line 15: Line 11:
 
# Ensure no other USB devices are plugged into the receiver <br />
 
# Ensure no other USB devices are plugged into the receiver <br />
 
# Insert the USB stick containing the image into the rear port. <br />
 
# Insert the USB stick containing the image into the rear port. <br />
# Power the receiver on. <br />
+
# Power on the receiver. <br />
# You will be prompted on your TV screen to press and hold down ‘OK’ button on your REMOTE to commence the flashing process. The flashing process will then commence and progress show on TV screen. <br />
+
# You will be prompted on your TV screen to press and hold down ‘OK’ button on your REMOTE to commence the flashing process. The flashing process will then commence and progress will be show on TV screen. <br />
 
# If successful the receiver will reboot itself after the flashing process has completed. <br />
 
# If successful the receiver will reboot itself after the flashing process has completed. <br />
 
# Remove USB stick that contains the image files.<br />
 
# Remove USB stick that contains the image files.<br />
  
 
<u>Note:</u> In order to load the image automagically, rename the file called "noforce" to "force"
 
<u>Note:</u> In order to load the image automagically, rename the file called "noforce" to "force"

Latest revision as of 14:09, 26 October 2023

RECEIVERS-Edision-001.jpg

How to flash an Edision receiver. The procedure is the same for all models...

Format your USB stick with an MBR partition table and a FAT32 file system. Download the image for the receiver of your choice from https://openpli.org/download/edision. Unpack the ZIP file and place the content on a USB disk.

FLASHING THE RECEIVER.

  1. Power off the receiver
  2. Ensure no other USB devices are plugged into the receiver
  3. Insert the USB stick containing the image into the rear port.
  4. Power on the receiver.
  5. You will be prompted on your TV screen to press and hold down ‘OK’ button on your REMOTE to commence the flashing process. The flashing process will then commence and progress will be show on TV screen.
  6. If successful the receiver will reboot itself after the flashing process has completed.
  7. Remove USB stick that contains the image files.

Note: In order to load the image automagically, rename the file called "noforce" to "force"