Receivers:Edision

From OpenPLi Wiki
Revision as of 14:09, 26 October 2023 by WanWizard (talk | contribs) (USB stick needs to have an MBR partition table, most boxes don't support GPT)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
RECEIVERS-Edision-001.jpg

How to flash an Edision receiver. The procedure is the same for all models...

Format your USB stick with an MBR partition table and a FAT32 file system. Download the image for the receiver of your choice from https://openpli.org/download/edision. Unpack the ZIP file and place the content on a USB disk.

FLASHING THE RECEIVER.

  1. Power off the receiver
  2. Ensure no other USB devices are plugged into the receiver
  3. Insert the USB stick containing the image into the rear port.
  4. Power on the receiver.
  5. You will be prompted on your TV screen to press and hold down ‘OK’ button on your REMOTE to commence the flashing process. The flashing process will then commence and progress will be show on TV screen.
  6. If successful the receiver will reboot itself after the flashing process has completed.
  7. Remove USB stick that contains the image files.

Note: In order to load the image automagically, rename the file called "noforce" to "force"