Receivers:Formuler

How to flash the receiver...
Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk.

1. Power off the receiver
2. Ensure no other USB devices are plugged into the receiver
3. Insert the USB stick containing the image into the rear port.
4. Power the receiver on.
5. The display should read USB. Press the standby button on the side of the front to install the image.
6. If successful the receiver will reboot itself after the flashing process has completed.
7. Remove USB stick that contains the image files.

Note: In order to load the image automagically, rename the file called "noforce" to "force"