Receivers:Maxdigital

Supported receivers.

The only receiver that is or has been supported thus far is the Maxdigital XP1000.

Howto flash the box.

- Download an image on http://Openpli.org/download/maxdigital/ and unpack the image on a FAT32 formatted USBstick. - Shut down the power of the receiver by switching off the powerswitch at the back of the receiver. - Insert the USB stick containing the image files into the rear USB port on the receiver. - Power on the receiver with the powerswitch as pushed before at the back of the box. - Wait for both the RED Recording LED and the LED on the front standby button to appear RED, once you see this you must press the CH+ located behind the flap on the front of the receiver to initiate the flashing process. - Wait for the image to flash, during this time the Standby button LED will appear purple to indicate that the image is being flashed. - When the flashing process has completed the receiver will automatically reboot.