Difference between revisions of "Receivers:Maxytex"

From OpenPLi Wiki
Jump to: navigation, search
(Created page with "---Concept---- frameless|right =='''How to flash Maxytec Multibox'''<br />== First download an image on http://openpli.org/download/maxyt...")
 
 
(One intermediate revision by the same user not shown)
Line 10: Line 10:
 
   
 
   
 
# Shut down the power of the receiver by switching off the powerswitch at the back of the receiver. <br />
 
# Shut down the power of the receiver by switching off the powerswitch at the back of the receiver. <br />
# Insert the USB stick containing the image files into the rear USB port on the receiver. <br />
+
# Insert the USB stick containing the image files into the side USB 2.0 port on the receiver. (Do '''NOT''' the USB 3.0 port at the back) <br />
 
# Power on the receiver with the powerswitch as pushed before at the back of the box. <br />
 
# Power on the receiver with the powerswitch as pushed before at the back of the box. <br />
 
# Wait for both the RED Recording LED and the LED on the front standby button to appear RED, once you see this you must press the CH+ located behind the flap on the front of the receiver to initiate the flashing process. <br />
 
# Wait for both the RED Recording LED and the LED on the front standby button to appear RED, once you see this you must press the CH+ located behind the flap on the front of the receiver to initiate the flashing process. <br />

Latest revision as of 13:44, 8 June 2019

---Concept----

How to flash Maxytec Multibox

First download an image on http://openpli.org/download/maxytec/ and
unpack the image on a FAT32 formatted USBstick.

FLASHING THE IMAGE.

  1. Shut down the power of the receiver by switching off the powerswitch at the back of the receiver.
  2. Insert the USB stick containing the image files into the side USB 2.0 port on the receiver. (Do NOT the USB 3.0 port at the back)
  3. Power on the receiver with the powerswitch as pushed before at the back of the box.
  4. Wait for both the RED Recording LED and the LED on the front standby button to appear RED, once you see this you must press the CH+ located behind the flap on the front of the receiver to initiate the flashing process.
  5. Wait for the image to flash, during this time the Recording LED will stay red, and Standby button LED will turn purple to indicate that the image is being flashed.
  6. When the flashing process has completed the receiver will automatically reboot.

Note: In order to load the image automatically, rename the file called "noforce" which is present on the stick to "force"

After having flashed the box it starts to boot and you can continue with the setup or installation wizard of the settopbox.