Difference between revisions of "Receivers:Xtrend"

Revision as of 17:58, 6 May 2017

Supported receivers

How to flash the receiver...

Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk.

FLASHING THE RECEIVER.

Unzip compressed file.
Copy the "etxxxx" folder to a USB Pen Drive.
Power off or reboot the receiver with the mains switch on the rear. Connect USB Pen Drive.
Power on receiver with the mains switch on the rear.
After rebooting or cold start the power LED will blink several times after some time. At that moment press the power button on the front panel.
Flashing of the image will start
Booting will start automatically once the flashing process has completed

Note: In order to load the image automagically, rename the file called "noforce" to "force"

Revision as of 17:57, 6 May 2017 (view source) Rick Hunter (talk \| contribs) ← Older edit		Revision as of 17:58, 6 May 2017 (view source) Rick Hunter (talk \| contribs) Newer edit →
Line 29:		Line 29:
	# Booting will start automatically once the flashing process has completed<br />		# Booting will start automatically once the flashing process has completed<br />

−	Note: In order to load the image automagically, rename the file called "noforce" to "force"	+	<u>Note:</u> In order to load the image automagically, rename the file called "noforce" to "force"