Difference between revisions of "Receivers:Xtrend"

From OpenPLi Wiki
Jump to: navigation, search
Line 15: Line 15:
 
* ET10000<br />
 
* ET10000<br />
  
Broken Securityboard? [https://wiki.openpli.org/index.php/Receivers:Xtrend_Securityboard Here] is a repair instruction. (Not confirmed yet and in the German Language)
+
Broken Securityboard? [[Receivers:Xtrend_Securityboard | Here]] is a repair instruction. (Not confirmed yet and in the German Language)
  
 
'''How to flash the receiver...'''<br />
 
'''How to flash the receiver...'''<br />

Revision as of 23:59, 30 June 2017

Supported receivers

RECEIVERS-Xtrend-001.png
  • ET4x00
  • ET5x00
  • ET6000
  • ET6500
  • ET7000
  • ET7500
  • ET8000
  • ET8500
  • ET9000
  • ET9200
  • ET9500
  • ET10000

Broken Securityboard? Here is a repair instruction. (Not confirmed yet and in the German Language)

How to flash the receiver...

Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk.

FLASHING THE RECEIVER.

  1. Unzip compressed file.
  2. Copy the "etxxxx" folder to a USB Pen Drive.
  3. Power off or reboot the receiver with the mains switch on the rear. Connect USB Pen Drive.
  4. Power on receiver with the mains switch on the rear.
  5. After rebooting or cold start the power LED will blink several times after some time. At that moment press the power button on the front panel.
  6. Flashing of the image will start
  7. Booting will start automatically once the flashing process has completed

Note: In order to load the image automagically, rename the file called "noforce" to "force"