Difference between revisions of "Spycat"

From OpenPLi Wiki
Jump to: navigation, search
m
 
(5 intermediate revisions by 3 users not shown)
Line 1: Line 1:
'''Supported receivers'''<br />
+
[[File:RECEIVER-Spycat-001.png|frameless|right]]
  
[[File:RECEIVER-Spycat-001.jpg|frameless|right]]
+
=='''How to flash the receiver...'''<br />==
* Spycat<br />
 
* Spycat Mini<br />
 
* Spycat plus<br />
 
  
 
+
Format your USB stick with an MBR partition table and a FAT32 file system. <br />
'''How to flash the receiver...'''<br />
+
Download a image from: https://openpli.org/download/spycat. <br />
 
+
Unpack the ZIP file and place the content on the USB stick. <br />
Download a image from: https://openpli.org
 
Unpack the ZIP file and place the content on a USB disk.
 
  
 
FLASHING THE RECEIVER. <br />
 
FLASHING THE RECEIVER. <br />
# Unzip compressed file.<br />
+
# Unzip compressed file.
# Copy the folder to a USB Pen Drive.<br />
+
# Copy the folder to a USB Pen Drive.
# Power off or reboot the receiver with the mains switch on the rear. Connect USB Pen Drive.<br />
+
# Power off or reboot the receiver. Connect USB Pen Drive.
# Power on receiver with the mains switch on the rear.<br />
+
# Power on receiver.
# After rebooting or cold start the power LED will blink several times after some time. At that moment press the power button on the front panel.<br />
+
# You will be prompted on your TV screen to press and hold down '''OK''' button on your remote control to commence the flashing process. The flashing process will then commence and progress show on TV screen.
# Flashing of the image will start<br />
+
# Booting will start automatically once the flashing process has completed.
# Booting will start automatically once the flashing process has completed<br />
 

Latest revision as of 14:24, 26 October 2023

RECEIVER-Spycat-001.png

How to flash the receiver...

Format your USB stick with an MBR partition table and a FAT32 file system.
Download a image from: https://openpli.org/download/spycat.
Unpack the ZIP file and place the content on the USB stick.

FLASHING THE RECEIVER.

  1. Unzip compressed file.
  2. Copy the folder to a USB Pen Drive.
  3. Power off or reboot the receiver. Connect USB Pen Drive.
  4. Power on receiver.
  5. You will be prompted on your TV screen to press and hold down OK button on your remote control to commence the flashing process. The flashing process will then commence and progress show on TV screen.
  6. Booting will start automatically once the flashing process has completed.