Difference between revisions of "Uclan"

Revision as of 18:53, 29 July 2020

How to flash the receiver...

Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk.

FLASHING THE RECEIVER.

Download latest Enigma2 Image of your choice.
USB 2.0or 3.0 minimum 2 GB USB stick formatted with FAT32.
Unpack the image and copy BOTH the 'octagon' folder and the 'usb_update.bin' to root of the USB stick.
Turn off the box.
Plug the USB stick into the USB 3.0 port on the right side.
Press and hold the standby button and power on the box until "Updt" is displayed.
Select "Recovery From USB" from TV screen menu.
Box restarts when update is completed.

@@ Line 6: / Line 6: @@
 FLASHING THE RECEIVER. <br />
-# Power off the receiver <br />
+# Download latest Enigma2 Image of your choice.
-# Ensure no other USB devices are plugged into the receiver <br />
+# USB 2.0or 3.0 minimum 2 GB USB stick formatted with FAT32.
-# Insert the USB stick containing the image into the rear port. <br />
+# Unpack the image and copy BOTH the 'octagon' folder and the 'usb_update.bin' to root of the USB stick.
-# Power the receiver on. <br />
+# Turn off the box.
-# You will be prompted on your TV screen to press and hold down ‘OK’ button on your REMOTE to commence the flashing process. The flashing process will then commence and progress show on TV screen. <br />
+# Plug the USB stick into the USB 3.0 port on the right side.
-# If successful the receiver will reboot itself after the flashing process has completed. <br />
+# Press and hold the standby button and power on the box until "Updt" is displayed.
-# Remove USB stick that contains the image files.<br />
+# Select "Recovery From USB" from TV screen menu.
+# Box restarts when update is completed.
-<u>Note:</u> In order to load the image automagically, rename the file called "noforce" to "force"