Difference between revisions of "Uclan"

From OpenPLi Wiki
Jump to: navigation, search
Line 14: Line 14:
 
# Select "Flash Recovery Image" from TV screen menu. [[File:RECEIVERS-Uclan-002.jpg|frameless|centre|750px]]<br />
 
# Select "Flash Recovery Image" from TV screen menu. [[File:RECEIVERS-Uclan-002.jpg|frameless|centre|750px]]<br />
 
# Box restarts when update is completed.
 
# Box restarts when update is completed.
 +
#If you wnt to flash from the internet, connect the receiver to your LAN

Revision as of 08:32, 15 April 2023

RECEIVERS-Uclan-001.jpg

How to flash the receiver...

Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk.

FLASHING THE RECEIVER.

  1. Download latest Enigma2 Image of your choice.
  2. USB 2.0 or 3.0 minimum 2 GB USB stick formatted with FAT32.
  3. Unpack the image to the root of the USB stick, so in \
  4. Turn off the box.
  5. Plug the USB stick into the USB 3.0 port on the right side.
  6. Press and hold the standby button and power on the box until "UPdt" is displayed.
  7. Select "Flash Recovery Image" from TV screen menu.
    RECEIVERS-Uclan-002.jpg

  8. Box restarts when update is completed.
  9. If you wnt to flash from the internet, connect the receiver to your LAN