Difference between revisions of "Uclan"

From OpenPLi Wiki
Jump to: navigation, search
m (USB stick needs to have an MBR partition table, most boxes don't support GPT)
 
(31 intermediate revisions by one other user not shown)
Line 1: Line 1:
[[File:RECEIVERS-Edision-001.jpg|frameless|right]]
+
[[File:RECEIVERS-Uclan-001.jpg|right|250px]]
 
'''How to flash the receiver...'''<br />
 
'''How to flash the receiver...'''<br />
  
Download a image from: https://openpli.org
+
Format your USB stick with an MBR partition table and a FAT32 file system.<br />
Unpack the ZIP file and place the content on a USB disk.
+
Download a image from: https://openpli.org/download/uclan.<br />
 +
Unpack the ZIP file and place the content on the USB stick.<br />
  
 
FLASHING THE RECEIVER. <br />
 
FLASHING THE RECEIVER. <br />
Line 12: Line 13:
 
# Plug the USB stick into the USB 3.0 port on the right side.
 
# Plug the USB stick into the USB 3.0 port on the right side.
 
# Press and hold the standby button and power on the box until "UPdt" is displayed.
 
# Press and hold the standby button and power on the box until "UPdt" is displayed.
[[File:RECEIVERS-Uclan-002.jpg|frameless|right]]
+
# Select "Flash Recovery Image" from TV screen menu. [[File:RECEIVERS-Uclan-002.jpg|frameless|centre|750px]]<br />
# Select "Recovery From USB" from TV screen menu.
 
 
# Box restarts when update is completed.
 
# Box restarts when update is completed.
 +
#If you wnt to flash from the internet, connect the receiver to your LAN

Latest revision as of 14:25, 26 October 2023

RECEIVERS-Uclan-001.jpg

How to flash the receiver...

Format your USB stick with an MBR partition table and a FAT32 file system.
Download a image from: https://openpli.org/download/uclan.
Unpack the ZIP file and place the content on the USB stick.

FLASHING THE RECEIVER.

  1. Download latest Enigma2 Image of your choice.
  2. USB 2.0 or 3.0 minimum 2 GB USB stick formatted with FAT32.
  3. Unpack the image to the root of the USB stick, so in \
  4. Turn off the box.
  5. Plug the USB stick into the USB 3.0 port on the right side.
  6. Press and hold the standby button and power on the box until "UPdt" is displayed.
  7. Select "Flash Recovery Image" from TV screen menu.
    RECEIVERS-Uclan-002.jpg

  8. Box restarts when update is completed.
  9. If you wnt to flash from the internet, connect the receiver to your LAN