Uclan

From OpenPLi Wiki
Revision as of 14:25, 26 October 2023 by WanWizard (talk | contribs) (USB stick needs to have an MBR partition table, most boxes don't support GPT)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
RECEIVERS-Uclan-001.jpg

How to flash the receiver...

Format your USB stick with an MBR partition table and a FAT32 file system.
Download a image from: https://openpli.org/download/uclan.
Unpack the ZIP file and place the content on the USB stick.

FLASHING THE RECEIVER.

  1. Download latest Enigma2 Image of your choice.
  2. USB 2.0 or 3.0 minimum 2 GB USB stick formatted with FAT32.
  3. Unpack the image to the root of the USB stick, so in \
  4. Turn off the box.
  5. Plug the USB stick into the USB 3.0 port on the right side.
  6. Press and hold the standby button and power on the box until "UPdt" is displayed.
  7. Select "Flash Recovery Image" from TV screen menu.
    RECEIVERS-Uclan-002.jpg

  8. Box restarts when update is completed.
  9. If you wnt to flash from the internet, connect the receiver to your LAN