Difference between revisions of "Vimastec"

From OpenPLi Wiki
Jump to: navigation, search
m (USB stick needs to have an MBR partition table, most boxes don't support GPT)
 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
'''Supported receivers'''<br />
 
 
[[File:RECEIVERS-Vimastec.png|frameless|right]]
 
[[File:RECEIVERS-Vimastec.png|frameless|right]]
  
VS 1000<br />
+
=='''How to flash the VS 1000 receiver...'''==
VS 1500
 
  
----
+
# Format your USB stick with an MBR partition table and a FAT32 file system.
'''How to flash the VS 1000 receiver...'''
+
# Download a image from: https://openpli.org/download/vimastec
There are two ways to flash the VS 1000<br />
+
# Unzip the image file onto the USB stick (you now have a directory '''/vs1000''' with 2 files: imageversion, disk.img)
 +
# Switch the box off and unplug the power
 +
# Plug the usb stick into the receiver
 +
# Press and hold front button on the box, plug-in the power, and wait "flashing" on display, only then release the button
 +
# The receiver will now be flashed. After completion the receiver will restart
  
'''Solution 1:'''
+
If you don't want to switch off and unplug, you can skip that step, but then expect having to wait very long (40 sec or more) before "flashing" is shown on the display.
# Fat32 formated usb with directory '''/vs1000'''  <- put there unpacked image ( 2 files: imageversion, disk.img)
 
# plug usb flash into receiver
 
# unplug power
 
# press and hold front button on box and plug-in power and wait "flashing" on display, then release button on box
 
# The receiver will now be flashed. After completion the receiver will restart
 
 
thats all ... flash starting
 
 
'''Solution 2:'''
 
# Fat32 formated usb with directory '''/vs1000'''  <- put there unpacked image ( 2 files: imageversion, disk.img)
 
# plug usb flash into receiver
 
# Press and hold front button and wait "flashing" on display ... but it spend cca 40sec before "flashing"
 
# The receiver will now be flashed. After completion the receiver will restart
 
  
----
+
=='''How to flash the VS 1500 receiver...'''==
'''How to flash the VS 1500 receiver...'''
 
 
   
 
   
There are two ways to flash the VS 1500<br />
 
  
'''Solution 1:'''
+
# Format your USB stick with an MBR partition table and a FAT32 file system.
# Fat32 formated usb with directory '''/vs1500'''   <- put there unpacked image ( 2 files: imageversion, disk.img)
+
# Download a image from: https://openpli.org/download/vimastec
# plug usb flash into receiver
+
# Unzip the image file onto the USB stick (you now have a directory '''/vs1500''' with 2 files: imageversion, disk.img)
# unplug power
+
# Switch the box off and unplug the power
# press and hold front button on box and plug-in power and wait "flashing" on display, then release button on box
+
# Plug the usb stick into the receiver
# The receiver will now be flashed. After completion the receiver will restart
+
# Press and hold front button on the box, plug-in the power, and wait "flashing" on display, only then release the button
 
thats all ... flash starting
 
 
'''Solution 2:'''
 
# Fat32 formated usb with directory '''/vs1500'''  <- put there unpacked image ( 2 files: imageversion, disk.img)
 
# plug usb flash into receiver
 
# Press and hold front button and wait "flashing" on display ... but it spend cca 40sec before "flashing"
 
 
# The receiver will now be flashed. After completion the receiver will restart
 
# The receiver will now be flashed. After completion the receiver will restart
 +
 +
If you don't want to switch off and unplug, you can skip that step, but then expect having to wait very long (40 sec or more) before "flashing" is shown on the display.

Latest revision as of 14:32, 26 October 2023

RECEIVERS-Vimastec.png

How to flash the VS 1000 receiver...

  1. Format your USB stick with an MBR partition table and a FAT32 file system.
  2. Download a image from: https://openpli.org/download/vimastec
  3. Unzip the image file onto the USB stick (you now have a directory /vs1000 with 2 files: imageversion, disk.img)
  4. Switch the box off and unplug the power
  5. Plug the usb stick into the receiver
  6. Press and hold front button on the box, plug-in the power, and wait "flashing" on display, only then release the button
  7. The receiver will now be flashed. After completion the receiver will restart

If you don't want to switch off and unplug, you can skip that step, but then expect having to wait very long (40 sec or more) before "flashing" is shown on the display.

How to flash the VS 1500 receiver...

  1. Format your USB stick with an MBR partition table and a FAT32 file system.
  2. Download a image from: https://openpli.org/download/vimastec
  3. Unzip the image file onto the USB stick (you now have a directory /vs1500 with 2 files: imageversion, disk.img)
  4. Switch the box off and unplug the power
  5. Plug the usb stick into the receiver
  6. Press and hold front button on the box, plug-in the power, and wait "flashing" on display, only then release the button
  7. The receiver will now be flashed. After completion the receiver will restart

If you don't want to switch off and unplug, you can skip that step, but then expect having to wait very long (40 sec or more) before "flashing" is shown on the display.