Difference between revisions of "Vimastec"
From OpenPLi Wiki
Rick Hunter (talk | contribs) |
|||
| Line 11: | Line 11: | ||
---- | ---- | ||
| − | '''How to flash the VS 1000 receiver...''' | + | =='''How to flash the VS 1000 receiver...'''== |
There are two ways to flash the VS 1000<br /> | There are two ways to flash the VS 1000<br /> | ||
| Line 31: | Line 31: | ||
# The receiver will now be flashed. After completion the receiver will restart | # The receiver will now be flashed. After completion the receiver will restart | ||
| − | + | ||
| − | '''How to flash the VS 1500 receiver...''' | + | |
| + | =='''How to flash the VS 1500 receiver...'''== | ||
There are two ways to flash the VS 1500<br /> | There are two ways to flash the VS 1500<br /> | ||
Revision as of 14:00, 3 March 2018
Supported receivers
VS 1000
VS 1500
How to flash the VS 1000 receiver...
There are two ways to flash the VS 1000
Solution 1:
- Download a image from: https://openpli.org
- Fat32 formated usb with directory /vs1000 <- put there unpacked image ( 2 files: imageversion, disk.img)
- plug usb flash into receiver
- unplug power
- press and hold front button on box and plug-in power and wait "flashing" on display, then release button on box
- The receiver will now be flashed. After completion the receiver will restart
thats all ... flash starting
Solution 2:
- Download a image from: https://openpli.org
- Fat32 formated usb with directory /vs1000 <- put there unpacked image ( 2 files: imageversion, disk.img)
- plug usb flash into receiver
- Press and hold front button and wait "flashing" on display ... but it spend cca 40sec before "flashing"
- The receiver will now be flashed. After completion the receiver will restart
How to flash the VS 1500 receiver...
There are two ways to flash the VS 1500
Solution 1:
- Download a image from: https://openpli.org
- Fat32 formated usb with directory /vs1500 <- put there unpacked image ( 2 files: imageversion, disk.img)
- plug usb flash into receiver
- unplug power
- press and hold front button on box and plug-in power and wait "flashing" on display, then release button on box
- The receiver will now be flashed. After completion the receiver will restart
thats all ... flash starting
Solution 2:
- Download a image from: https://openpli.org
- Fat32 formated usb with directory /vs1500 <- put there unpacked image ( 2 files: imageversion, disk.img)
- plug usb flash into receiver
- Press and hold front button and wait "flashing" on display ... but it spend cca 40sec before "flashing"
- The receiver will now be flashed. After completion the receiver will restart
