Difference between revisions of "Vimastec"
From OpenPLi Wiki
Rick Hunter (talk | contribs) |
Rick Hunter (talk | contribs) |
||
| Line 15: | Line 15: | ||
'''Solution 1:''' | '''Solution 1:''' | ||
| + | # Download a image from: https://openpli.org | ||
# Fat32 formated usb with directory '''/vs1000''' <- put there unpacked image ( 2 files: imageversion, disk.img) | # Fat32 formated usb with directory '''/vs1000''' <- put there unpacked image ( 2 files: imageversion, disk.img) | ||
# plug usb flash into receiver | # plug usb flash into receiver | ||
| Line 24: | Line 25: | ||
'''Solution 2:''' | '''Solution 2:''' | ||
| + | # Download a image from: https://openpli.org | ||
# Fat32 formated usb with directory '''/vs1000''' <- put there unpacked image ( 2 files: imageversion, disk.img) | # Fat32 formated usb with directory '''/vs1000''' <- put there unpacked image ( 2 files: imageversion, disk.img) | ||
# plug usb flash into receiver | # plug usb flash into receiver | ||
| Line 35: | Line 37: | ||
'''Solution 1:''' | '''Solution 1:''' | ||
| + | # Download a image from: https://openpli.org | ||
# Fat32 formated usb with directory '''/vs1500''' <- put there unpacked image ( 2 files: imageversion, disk.img) | # Fat32 formated usb with directory '''/vs1500''' <- put there unpacked image ( 2 files: imageversion, disk.img) | ||
# plug usb flash into receiver | # plug usb flash into receiver | ||
| Line 44: | Line 47: | ||
'''Solution 2:''' | '''Solution 2:''' | ||
| + | # Download a image from: https://openpli.org | ||
# Fat32 formated usb with directory '''/vs1500''' <- put there unpacked image ( 2 files: imageversion, disk.img) | # Fat32 formated usb with directory '''/vs1500''' <- put there unpacked image ( 2 files: imageversion, disk.img) | ||
# plug usb flash into receiver | # plug usb flash into receiver | ||
# Press and hold front button and wait "flashing" on display ... but it spend cca 40sec before "flashing" | # Press and hold front button and wait "flashing" on display ... but it spend cca 40sec before "flashing" | ||
# The receiver will now be flashed. After completion the receiver will restart | # The receiver will now be flashed. After completion the receiver will restart | ||
Revision as of 23:07, 30 June 2017
Supported receivers
VS 1000
VS 1500
How to flash the VS 1000 receiver...
There are two ways to flash the VS 1000
Solution 1:
- Download a image from: https://openpli.org
- Fat32 formated usb with directory /vs1000 <- put there unpacked image ( 2 files: imageversion, disk.img)
- plug usb flash into receiver
- unplug power
- press and hold front button on box and plug-in power and wait "flashing" on display, then release button on box
- The receiver will now be flashed. After completion the receiver will restart
thats all ... flash starting
Solution 2:
- Download a image from: https://openpli.org
- Fat32 formated usb with directory /vs1000 <- put there unpacked image ( 2 files: imageversion, disk.img)
- plug usb flash into receiver
- Press and hold front button and wait "flashing" on display ... but it spend cca 40sec before "flashing"
- The receiver will now be flashed. After completion the receiver will restart
How to flash the VS 1500 receiver...
There are two ways to flash the VS 1500
Solution 1:
- Download a image from: https://openpli.org
- Fat32 formated usb with directory /vs1500 <- put there unpacked image ( 2 files: imageversion, disk.img)
- plug usb flash into receiver
- unplug power
- press and hold front button on box and plug-in power and wait "flashing" on display, then release button on box
- The receiver will now be flashed. After completion the receiver will restart
thats all ... flash starting
Solution 2:
- Download a image from: https://openpli.org
- Fat32 formated usb with directory /vs1500 <- put there unpacked image ( 2 files: imageversion, disk.img)
- plug usb flash into receiver
- Press and hold front button and wait "flashing" on display ... but it spend cca 40sec before "flashing"
- The receiver will now be flashed. After completion the receiver will restart
