Xsarius

From OpenPLi Wiki
Revision as of 14:28, 9 May 2018 by 40H3X (talk | contribs)
Jump to: navigation, search
RECEIVERS-Xsarius-001.jpg

Supported receivers
Fusion HD

Fusion HD SE

Pure HD

Revo 4K

Galaxy 4K FBC

Pure HD SE


How to flash the receiver...

Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk.

FLASHING THE RECEIVER.

  1. Unzip compressed file.
  2. Copy the content to a USB Pen Drive.
  3. Power off or reboot the receiver with the mains switch on the rear. Connect USB Pen Drive.
  4. Power on receiver with the mains switch on the rear.
  5. A blue screen appears with a notification that new firmware has been detected.
  6. Press the power button on the RCU.
  7. Flashing of the image will start, the process can be monitored on the TV
  8. When the flashing has been completed, you'll be noticed to remove the USB drive and restart the receiver.