Receivers:GI

Supported receivers

ET-7000 mini
ET-11000

How to flash the ET-7000 mini receiver...
Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk.

1. Power off the receiver
2. Ensure no other USB devices are plugged into the receiver
3. Insert the USB stick containing the image into the front panel.
4. Power the receiver on with the button on the back of the receiver.
5. When the white LED blinks, press the button on the front of the panel to start the update.
6. If successful the receiver will reboot itself after the flashing process has completed.
7. Remove USB stick that contains the image files.

How to flash the ET-1100 mini receiver...

1. Unzip the archive and transfer et1x000 with the contents to the root of the USB drive in the FAT32 file system
2. Insert the USB drive into the connector on the front panel of Galaxy Innovations ET-11000 (hidden under the card slot cover)
3. Power on the receiver by pressing the ON button on the back of the receiver
4. After switching on the LED display, PrES should appear and countdown P000, P001, P002, P003, the update should be confirmed by the POWER button within four seconds, after confirmation, the message "Init" and then "root" will appear and the update process will begin.
5. Wait for the update to finish, the receiver will automatically complete the update and boot into the operating mode.