Difference between revisions of "Receivers:Xtrend"
From OpenPLi Wiki
Rick Hunter (talk | contribs) |
|||
| Line 1: | Line 1: | ||
'''Supported receivers'''<br /> | '''Supported receivers'''<br /> | ||
| − | [[File:RECEIVERS-Xtrend-001.png| | + | [[File:RECEIVERS-Xtrend-001.png|frameless|right]] |
* ET4x00<br /> | * ET4x00<br /> | ||
* ET5x00<br /> | * ET5x00<br /> | ||
Revision as of 17:23, 13 May 2017
Supported receivers
- ET4x00
- ET5x00
- ET6000
- ET6500
- ET7000
- ET7500
- ET8000
- ET8500
- ET9000
- ET9200
- ET9500
- ET10000
How to flash the receiver...
Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk.
FLASHING THE RECEIVER.
- Unzip compressed file.
- Copy the "etxxxx" folder to a USB Pen Drive.
- Power off or reboot the receiver with the mains switch on the rear. Connect USB Pen Drive.
- Power on receiver with the mains switch on the rear.
- After rebooting or cold start the power LED will blink several times after some time. At that moment press the power button on the front panel.
- Flashing of the image will start
- Booting will start automatically once the flashing process has completed
Note: In order to load the image automagically, rename the file called "noforce" to "force"
