Difference between revisions of "Receivers:SAB"
From OpenPLi Wiki
Rick Hunter (talk | contribs) (Created page with "'''Supported receivers<br />''' frame|right Alpha Triple HD<br /> '''How to flash the Alpha Triple HD receiver...'''<br /> Download a image fro...") |
m (USB stick needs to have an MBR partition table, most boxes don't support GPT) |
||
| (4 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | + | [[File:RECEIVERS-SAB-001.jpg|frameless|right]] | |
| − | [[File:RECEIVERS-SAB-001.jpg| | ||
| − | |||
| − | '''How to flash the Alpha Triple HD receiver...'''<br /> | + | =='''How to flash the Alpha Triple HD receiver...'''<br />== |
| − | Download a image from: https://openpli.org Unpack the ZIP file and place app_db_plugin folder on | + | Format your USB stick with an MBR partition table and a FAT32 file system<br /> |
| + | Download a image from: https://openpli.org/download/sab<br /> | ||
| + | Unpack the ZIP file and place app_db_plugin folder on the USB stick. | ||
| + | # Power off the receiver | ||
| + | # Ensure no other USB devices are plugged into the receiver | ||
# Insert the USB stick containing the image into the front panel. | # Insert the USB stick containing the image into the front panel. | ||
| − | # | + | # Power-on the receiver, and press the power button twice. |
| − | + | # When the white LED blinks, press the button on the front of the panel to start the update. | |
| − | # | ||
| − | |||
# If successful the receiver will reboot itself after the flashing process has completed. | # If successful the receiver will reboot itself after the flashing process has completed. | ||
# Remove USB stick that contains the image files. | # Remove USB stick that contains the image files. | ||
Latest revision as of 14:22, 26 October 2023
How to flash the Alpha Triple HD receiver...
Format your USB stick with an MBR partition table and a FAT32 file system
Download a image from: https://openpli.org/download/sab
Unpack the ZIP file and place app_db_plugin folder on the USB stick.
- Power off the receiver
- Ensure no other USB devices are plugged into the receiver
- Insert the USB stick containing the image into the front panel.
- Power-on the receiver, and press the power button twice.
- When the white LED blinks, press the button on the front of the panel to start the update.
- If successful the receiver will reboot itself after the flashing process has completed.
- Remove USB stick that contains the image files.
