Difference between revisions of "Axas"

Latest revision as of 14:06, 26 October 2023

Format your USB stick with an MBR partition table and a FAT32 file system.
Download image (not the multiboot).
Unpack file, after unpacking, there is a folder "e4hd" with content, disk.img and imageversion
Copy this folder with content to a USB stick, which has a LED light.
Switch off the box at the power switch and insert the stick into the USB port on the side.
Switch on the box at the mains switch and hold down the on/off button thats on top of the receiver.
if there is a light on the usb stick, you will see it flashing.
After the flashing in done the box will automatically reboot and if there is a backup on the stick it will ask to restore, when not you will see the install wizard.

@@ Line 1: / Line 1: @@
 [[File:RECEIVERS-Axas-001.png|frameless|right]]
+#Format your USB stick with an MBR partition table and a FAT32 file system.
 #Download image (not the multiboot).
 #Unpack file, after unpacking, there is a folder "e4hd" with content, disk.img and imageversion
 #Copy this folder with content to a USB stick, which has a LED light.
 #Switch off the box at the power switch and insert the stick into the USB port on the side.
-#Switch on the box at the mains switch and hold down the on/off button
+#Switch on the box at the mains switch and hold down the on/off button thats on top of the receiver.
-#if there is a light on the usb stick, watch it and wait until is stops flashing, this can take a few minutes.
+#if there is a light on the usb stick, you will see it flashing.
-#When flashing is complete, remove the stick from the port.
+#After the flashing in done the box will automatically reboot and if there is a backup on the stick it will ask to restore, when not you will see the install wizard.
-#The box now starts and the basic settings can be made.