Difference between revisions of "Receivers:Formuler"
From OpenPLi Wiki
Rick Hunter (talk | contribs) |
m (USB stick needs to have an MBR partition table, most boxes don't support GPT) |
||
| (8 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | + | [[File:RECEIVERS-Formuler-001.jpg|frameless|right]] | |
| − | + | '''How to flash the receiver...'''<br /> | |
| − | + | Format your USB stick with an MBR partition table and a FAT32 file system. Download a image from: https://openpli.org/download/formuler. Unpack the ZIP file and place the content on a USB disk. | |
| − | + | ||
| − | + | # Power off the receiver | |
| + | # Ensure no other USB devices are plugged into the receiver | ||
| + | # Insert the USB stick containing the image into the rear port. | ||
| + | # Power the receiver on. | ||
| + | # The display should read USB. Press the standby button on the side of the front to install the image. | ||
| + | # If successful the receiver will reboot itself after the flashing process has completed. | ||
| + | # Remove USB stick that contains the image files. | ||
| + | |||
| + | <u>Note:</u> In order to load the image automagically, rename the file called "noforce" to "force" | ||
Latest revision as of 14:09, 26 October 2023
How to flash the receiver...
Format your USB stick with an MBR partition table and a FAT32 file system. Download a image from: https://openpli.org/download/formuler. Unpack the ZIP file and place the content on a USB disk.
- Power off the receiver
- Ensure no other USB devices are plugged into the receiver
- Insert the USB stick containing the image into the rear port.
- Power the receiver on.
- The display should read USB. Press the standby button on the side of the front to install the image.
- If successful the receiver will reboot itself after the flashing process has completed.
- Remove USB stick that contains the image files.
Note: In order to load the image automagically, rename the file called "noforce" to "force"
