Difference between revisions of "Receivers:Formuler"
From OpenPLi Wiki
Rick Hunter (talk | contribs) |
Rick Hunter (talk | contribs) |
||
| Line 17: | Line 17: | ||
# If successful the receiver will reboot itself after the flashing process has completed. | # If successful the receiver will reboot itself after the flashing process has completed. | ||
# Remove USB stick that contains the image files. | # Remove USB stick that contains the image files. | ||
| + | |||
| + | <u>Note:</u> In order to load the image automagically, rename the file called "noforce" to "force" | ||
Revision as of 17:59, 6 May 2017
Supported receivers
F1
F3
F4
F4 Turbo
How to flash the receiver...
Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk.
- Power off the receiver
- Ensure no other USB devices are plugged into the receiver
- Insert the USB stick containing the image into the rear port.
- Power the receiver on.
- The display should read USB. Press the standby button on the side of the front to install the image.
- If successful the receiver will reboot itself after the flashing process has completed.
- Remove USB stick that contains the image files.
Note: In order to load the image automagically, rename the file called "noforce" to "force"
