Difference between revisions of "Axas"
From OpenPLi Wiki
| Line 2: | Line 2: | ||
#Download image (not the multiboot). | #Download image (not the multiboot). | ||
| − | # | + | #Unpack file, after unpacking, there is a folder "e4hd" with content, disk.img and imageversion |
#Copy this folder with content to a USB stick. | #Copy this folder with content to a USB stick. | ||
| + | #Use a usb stick which has en led. | ||
#Switch off the box at the power switch and insert the stick into the USB port on the side. | #Switch off the box at the power switch and insert the stick into the USB port on the side. | ||
#Switch on the box at the mains switch and hold down the on/off button | #Switch on the box at the mains switch and hold down the on/off button | ||
| − | #if there is a light on the usb stick, watch it and wait until is stops flashing | + | #if there is a light on the usb stick, watch it and wait until is stops flashing, this can take a few minutes. |
#When flashing is complete, remove the stick from the port. | #When flashing is complete, remove the stick from the port. | ||
#The box now starts and the basic settings can be made. | #The box now starts and the basic settings can be made. | ||
Revision as of 09:05, 5 October 2022
- Download image (not the multiboot).
- Unpack file, after unpacking, there is a folder "e4hd" with content, disk.img and imageversion
- Copy this folder with content to a USB stick.
- Use a usb stick which has en led.
- Switch off the box at the power switch and insert the stick into the USB port on the side.
- Switch on the box at the mains switch and hold down the on/off button
- if there is a light on the usb stick, watch it and wait until is stops flashing, this can take a few minutes.
- When flashing is complete, remove the stick from the port.
- The box now starts and the basic settings can be made.
