Difference between revisions of "Axas"
From OpenPLi Wiki
| Line 5: | Line 5: | ||
#Copy this folder with content to a USB stick, which has a LED light. | #Copy this folder with content to a USB stick, which has a LED light. | ||
#Switch off the box at the power switch and insert the stick into the USB port on the side. | #Switch off the box at the power switch and insert the stick into the USB port on the side. | ||
| − | #Switch on the box at the mains switch and hold down the on/off button | + | #Switch on the box at the mains switch and hold down the on/off button thats on top of the receiver. |
#if there is a light on the usb stick, watch it and wait until is stops flashing, this can take a few minutes. | #if there is a light on the usb stick, watch it and wait until is stops flashing, this can take a few minutes. | ||
#When flashing is complete, remove the stick from the port. | #When flashing is complete, remove the stick from the port. | ||
#The box now starts and the basic settings can be made. | #The box now starts and the basic settings can be made. | ||
Revision as of 09:07, 5 October 2022
- Download image (not the multiboot).
- Unpack file, after unpacking, there is a folder "e4hd" with content, disk.img and imageversion
- Copy this folder with content to a USB stick, which has a LED light.
- Switch off the box at the power switch and insert the stick into the USB port on the side.
- Switch on the box at the mains switch and hold down the on/off button thats on top of the receiver.
- if there is a light on the usb stick, watch it and wait until is stops flashing, this can take a few minutes.
- When flashing is complete, remove the stick from the port.
- The box now starts and the basic settings can be made.
