Offline decoding

We are looking for people owning a CI module, and people using a softcam with a local smartcard (should be everyone!) to test the offline decoding capability of all OpenPLi supported hardware.

To test, do the following:

1. Stop the softcam, and remove all CI modules from the box
2. Make a short test recording from an encoded channel that uses a smartcard, using a timer, with Recording type "don't descramble, record ECM"
3. When done, do the same, but then from an encoded channel that uses the CI module
4. In case you have a smartcard that works in both a CI and with a softcam, one recording is enough.

Now play back the recording(s), to make sure your screen stays black.

1. Start your softcam again, make sure the smartcard is operational, and play the first recording back again.
2. If you now have an image, your box supports offline decoding via the softcam.
3. Stop the softcam again, insert the CI module with the smartcard, and play back the second recording.
4. If you now have an image, your box supports offline decoding via de CI.

Source: https://forums.openpli.org/topic/51311-help-needed-offline-decoding/#entry720296

Receiver	Softcam	CI
vusolo4k	no	no
vuuno4k	no	no
formuler1:	yes	dunno
formuler3:	yes	dunno
formuler4:	yes	dunno
formuler4turbo:	yes	dunno
hd11:	yes	dunno
hd1200:	yes	dunno
hd1265:	yes	dunno
hd1500:	yes	dunno
hd2400:	yes	dunno
hd530c:	yes	dunno
vuduo2:	no	no
vuduo:	no	no
vusolo2:	no	no
vusolo:	no	no
vusolose:	no	no
vuultimo:	no	no
vuuno:	no	no
vuzero:	no	no
fusionhd:	yes	dunno
fusionhdse:	yes	dunno
purehd:	yes	dunno
et10000:	yes	dunno
et5x00:	yes	dunno
et6x00:	yes	dunno
et7x00:	no	dunno
et8000:	yes	dunno
et8500:	no	dunno
et9x00:	yes	dunno
h3:	yes	dunno
h4:	yes	dunno
h5:	yes	dunno
h7:	yes	dunno
i55:	yes	dunno
xp1000:	yes	dunno
et4x00:	yes	dunno
hd500c:	yes	dunno
hd1100:	yes	dunno
lc:	yes	dunno
sh1:	yes	dunno